ROTOR KILN FOR THE COMPARATIVE EVALUATION OF THE THERMAL UNITS' REFRACTORIES

A. N. Smirnov; G. G. Nemsadze; K. N. Sharandin; A. F. Tonkushin; D. V. Ryabii; A. Yu. Lizun

doi:10.17073/1683-4518-2018-4-145-148

ROTOR KILN FOR THE COMPARATIVE EVALUATION OF THE THERMAL UNITS' REFRACTORIES

A. N. Smirnov, G. G. Nemsadze, K. N. Sharandin, A. F. Tonkushin, D. V. Ryabii, A. Yu. Lizun

https://doi.org/10.17073/1683-4518-2018-4-145-148

Full Text:

Abstract

The results are presented for the refractory concretes which have been brought to the comparative tests in the laboratory-size rotary kiln, provided that the kiln could simulate the conditions which actually take place during operation in the thermal units. This allows to foretell equitably the efficiency of the various refractories' application as the lining material in the thermal unit of any kind. Also it is possible to carry out the dynamical investigation of the refractories of any kind in the course of the single experiment and thus to get the comparative analysis data in the specific corrosion environment.

Keywords

refractories, rotary kiln, lining wear, comparative analysis, erosion resistance,

About the Authors

A. N. Smirnov

Физико-технологический институт металлов и сплавов НАН Украины
Ukraine

G. G. Nemsadze

ПАО «Дженерал Инвестмент Ресурсес»
Ukraine

K. N. Sharandin

ПАО «Дженерал Инвестмент Ресурсес»
Ukraine

A. F. Tonkushin

ПАО «Дженерал Инвестмент Ресурсес»
Ukraine

D. V. Ryabii

Донбасский государственный технический университет
Ukraine

A. Yu. Lizun

ПАО «Дженерал Инвестмент Ресурсес»
Ukraine

References

1. Аксельрод, Л. М. Огнеупорная индустрия и изменения / Л. М. Аксельрод // Черная металлургия. ― 2017. ― № 10. ― С. 3‒14.

2. McEwan, N. The product development and continuous improvement process for refractories in the base metals industry / N. McEwan, R. A. Parry, T. Courtney [et al.] // 6th Southern African Base Metals Conference. ― 2011. ― P. 443‒461.

3. Аксельрод, Л. М. Метод определения шлакои клинкероустойчивости огнеупорных изделий для вращающихся печей / Л. М. Аксельрод, А. Г. Марясев, А. А. Платонов // Новые огнеупоры. ― 2013. ― № 4. ― С. 59‒64. [Aksel'rod, L. M. Method of determining the resistance of furnace refractories to slag and clinker / L. M. Aksel'rod, A. G. Maryasev, A. A. Platonov // Refractories and Industrial Ceramics. ― 2013. ― Vol. 54, № 2. ― P. 135‒140.]

4. Guichard, J. L. Improvements of corrosion rotary kiln test / J. L. Guichard, B. Collignon, A. Stuppfler [et al.] // 60th International Colloquium on Refractories, Aachen, Germаny. October 18‒19, 2017. ― P. 188.

Supplementary files

For citation: Smirnov A.N., Nemsadze G.G., Sharandin K.N., Tonkushin A.F., Ryabii D.V., Lizun A.Y. ROTOR KILN FOR THE COMPARATIVE EVALUATION OF THE THERMAL UNITS' REFRACTORIES. NOVYE OGNEUPORY (NEW REFRACTORIES). 2018;(4):145-148. https://doi.org/10.17073/1683-4518-2018-4-145-148

Refbacks

There are currently no refbacks.

ISSN 1683-4518 (Print)

Username
Password