UP-TO-DATE METHODS FOR THE HIGH-TEMPERATURE SYSTEMS SIMULATION

I. V. Kushnerev; L. M. Aksel'rod; A. A. Platonov

doi:10.17073/1683-4518-2018-1-33-41

UP-TO-DATE METHODS FOR THE HIGH-TEMPERATURE SYSTEMS SIMULATION

I. V. Kushnerev, L. M. Aksel'rod, A. A. Platonov

https://doi.org/10.17073/1683-4518-2018-1-33-41

Full Text:

Abstract

At the engineering department of the "Magnezit" Group the software package FactSage™ is successfully used, which enables to perform the thermodynamic equilibrium calculations in the multiple component systems, to build the phase diagrams, to calculate the liquid slags and glasses viscosity and to carry out other calculations. The special soft ware application makes if possible to analyze the early lining's wear, to realize the preliminary refractory material's composition's selection, to choose the slag's modifiers or the slag's adjustment, which are mostly effective from the point of view of both the metallurgical goals implementation and the refractory consumption reducing. The modeling results are given in the article for the processes taking place in the thermal units used in the ferrous and non-ferrous melts industry. Ill. 14. Ref. 8. Tab. 4.

Keywords

thermodynamic modeling, lining, refractory wear, slag corrosion, saturation limit, steel teeming ladle, ferroalloys furnace, converter,

About the Authors

I. V. Kushnerev

ООО «Группа «Магнезит»
Russian Federation

L. M. Aksel'rod

ООО «Группа «Магнезит»
Russian Federation

A. A. Platonov

ООО «Группа «Магнезит»
Russian Federation

References

1. Saunders, N. CALPHAD (Calculation of Phase Diagrams): a comprehensive guide / N. Saunders, A. P. Miodownik. ― Pergamon, 1998. ― 480 с.

2. Jung, I.-H. Overview of the applications of thermodynamic databases to steelmaking processes / I.-H. Jung // CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry. ― 2010. ― Vol. 34. ― С. 332‒362.

3. Cacciamani, G. An introduction to the Calphad method and the compound energy formalism / G. Cacciamani // Technology in Metallurgy, Materials and Mining. ― 2016. ― Jan./Mar. ― Vol. 13, № 1. ― Р. 16‒24.

4. Wöhrmeyer, C. The impact of synthetic slags on steel ladle refractory life time / C. Wöhrmeyer, E. ElorzaRicart, R. Jolly [et al.] // 51st International colloquium on refractories. ― 2008. ― P. 80‒83.

5. Охотский, В. Б. Модели металлургических систем / В. Б. Охотский. ― Днепропетровск, 2006. ― 287 с.

6. Бабенко, А. А. Анализ влияния температуры металла, основности и окисленности магнезиальных шлаков на предел насыщения MgO и рафинирующие свойства / А. А. Бабенко, С. М. Челпан, Л. Ю. Кривых [и др.] // Новые технологии и материалы в металлургии : сб. науч. тр. Екатеринбург : УрО РАН, 2005. ― C. 170‒178.

7. Gregurek, D. Refractory wear in lead, zinc and copper furnaces / D. Gregurek, C. Majcenovic // Unitecr 2015. ― Proceeding 92.

8. Malfliet, A. Degradation mechanisms and use of refractory linings in copper production processes: a critical review / A. Malfliet, S. Lotfian, L. Scheunis [et al.] // J. Europ. Ceram. Soc. ― Vol. 34. ― 2014. ― P. 849‒876.

Supplementary files

For citation: Kushnerev I.V., Aksel'rod L.M., Platonov A.A. UP-TO-DATE METHODS FOR THE HIGH-TEMPERATURE SYSTEMS SIMULATION. NOVYE OGNEUPORY (NEW REFRACTORIES). 2018;(2):33-41. https://doi.org/10.17073/1683-4518-2018-1-33-41

Refbacks

There are currently no refbacks.

ISSN 1683-4518 (Print)

Username
Password