.png)
.png)
Email this article 
THE INFLUENCE OF THE SILICON CARBIDE AGGREGATE CRUMBLED UP BY MEANS OF DIFFERENT METHODS ON THE HEAT-RESISTANT MIDDLE-CEMENT CASTABLE'S PROPERTIES
https://doi.org/10.17073/1683-4518-2018-3-50-56
Abstract
The investigating results are given in the article on the influence of the SiC aggregate crumbled up by means of different methods (milling and desintegration) on the morphology of the castable's particle obtained. It was established that the admixture to the heat-resistant castable's content of 10‒20 % desintegrated SiC comparing to the same amount of the milled SiC improves between 11 and 23 % the mechanical castable's properties after its hardening and burning, decreases its shrinkage up to 25 % and increases its thermal stability up to 20 %. Ill. 7. Ref. 19. Tab. 3.
About the Authors
I. PundieneLithuania
I. Prantskevichene
Lithuania
A. Kairite
Lithuania
References
1. Luz, A. P. Hot elastic modulus of Al2O3 ‒SiC‒SiO2 ‒C castables / A. P. Luz, M. Huger, V. C. Pandolfelli // Ceram. Int. ― 2011. ― Vol. 37. ― P. 2335‒2345.
2. Гоберис, С. Исследование физико-механических характеристик среднецементного жаростойкого бетона на шамотно-карбидкремниевых заполнителях и его практическое применение / С. Гоберис, И. Пундене, В. Антонович, Р. Стонис // Новые огнеупоры. ― 2005. ― № 9. ― С. 59‒63. [Goberis, S. Physicomechanical properties of medium-cement refractory castables containing chamotte-silicon carbide fillers tested for practical applications / S. Goberis, I. Pundene, V. Antonovich, R. Stonis // Refractories and Industrial Ceramics. ― 2005. ― Vol. 46, № 5. ― P. 333‒337.]
3. Каменских, В. А. Карбидкремниевые огнеупорные бетоны / В. А. Каменских, И. Д. Кащеев, Н. А. Митюшов [и др.] / Новые огнеупоры. ― 2005. ― № 12. ― С. 36‒39. [Kamenskikh, V. A. Silicon carbide refractory castables / V. A. Kamenskikh, I. D. Kashcheev, N. A. Mityushov [et al.] // Refractories and Industrial Ceramics. ― 2005. ― Vol. 46, № 6. ― P. 412‒415.]
4. Durmus, C. Evaluation of SiC additives in alumina-based castable refractories / C. Durmus, R. Mingu, S. Ozgen // Conference on Refractory Castables, Praha, 23‒24 November 2001. ― P. 41‒45.
5. Amin, M. H. The effect of nanosized carbon black on the physical and thermomechanical properties of Al2O3 ‒ SiC‒SiO2 ‒C composite / M. H. Amin, M. A. Ebrahimabadi, M. R. Rahimipour // Journal of Nanomaterials ― Special issue on nanocomposites for engineering applications. ― 2009. ― Vol. 2009. ― P. 1‒5.
6. Luz, A. P. Thermo-mechanical-chemical characterization of high-carbon-containing refractory castables / A. P. Luz, F. A. O. Valenzuela, V. G. Domiciano [et al.] // Journal of the Technical Association of Refractories, Japan. ― 2009. ― Vol. 29, № 2. ― P. 3‒7.
7. Hundere, A. M. Norway сastables for kiln furniture / A. M. Hundere, B. Myhre, B. Sandberg [et al.] // Proc. Of 3rd International Symposium on Refractories. ― 1998. ― P. 201‒205.
8. Bahloul, O. Young’s modulus evolution at high temperature of SiC refractory castables / O. Bahloul, T. Chotard, M. Huger [et al.] // J. Mater. Sci. ― 2010. ― Vol. 45. ― P. 3652‒3660.
9. Karamian, E. Influence of additives on nano-SiC whisker formation in alumina silicate‒SiC‒C monolithic refractories / E. Karamian, A. Monshi // Ceram. Int. ― 2010. ― Vol. 36. ― P. 811‒816.
10. Shishkin, A. Using of cavitation disperser, for porous ceramic and concrete material preparation / A. Shishkin, A. Korjakins, V. Mironovs // World Academy of Science, Engineering and Technology International Journal of Environmental, Chemical, Ecological, Geological and Geophysical Engineering. ― 2015. ― Vol. 9, № 5. ― P. 540‒543.
11. Peetsalu, P. Micropowders producted by disintegrator milling / P. Peetsalu, D. Goljandin, P. Kulu [et al.] // Powder Metall. ― 2003. ― Vol. 3. ― P. 99‒110.
12. Alcoa calcium aluminate cement test methods brochure. Revision 5. ― Frankfurt : Available through Alcoa Industrial Chemicals. ― 1999. ― 16 p.
13. Антонович, В. Методические особенности оценки термостойкости различных типов жаростойкого бетона на шамотных заполнителях / В. Антонович, М. Шюкшта, И. Пундене, Р. Стонис // Новые огнеупоры. ― 2011. ― № 2. ― С. 47‒51. [Antonovich, V. Procedural elements in estimation of the thermal shock resistance of different types of refractory concrete based on chamotte filler / V. Antonovich, M. Shyukshta, I. Pundene, R. Stonis // Refractories and Industrial Ceramics. ― 2011. ― Vol. 52, № 1. ― P. 70‒74.]
14. Otroj, S. The effect of deflocculants on the self-flow characteristics of ultra low-cement castables in Al2O3 ‒ SiC‒C system / S. Otroj, M. A. Bahrevar, F. Mostarzadeh [et al.] // Ceram. Int. ― 2005. ― Vol. 31. ― P. 647‒653.
15. Mehrotra, S. P. Mechanical activation of gibbsite and boehmite: new findings and their implications / S. P. Mehrotra, T. C. Alex, G. Greifzu [et al.] // Transactions of t he I nd i a n I n s t it ut e of Met a l s . ― 2016 . ― Vol . 6 9, № 1. ― P. 51‒59.
16. Terada, K. Physicochemical properties and surface free energy of ground talc / K. Terada, E. Yonemochi // Solid State Ionics. ― 2004. ― Vol. 172. ― P. 459‒462.
17. Cao, J. Influence of mechanochemical effect on physical properties of boiler bottom slag. Cailiao Kexue Yu Gongyi / J. Cao, Y. Fang, R. Fan [et al.] // Mater. Sci. Technol. ― 2015. ― Vol. 23, № 4. ― P. 111‒114.
18. Bumanis, G. Compressive strength of cement mortar affected by sand microfiller obtained with collision milling in disintegrator / G. Bumanis, D. Bajarea // Procedia Engineering. ― 2017. ― Vol. 172. ― P. 149‒156.
19. Соков, В. Н. Высокотемпературная теплоизоляция нового поколения / В. Н. Соков, В. В. Соков // Промышленная тепловая изоляция. Применение и производство : науч.-техн. конф., Москва, 2004 г. / ОАО «Теплопроект». ― 2004.
Supplementary files
For citation: Pundiene I., Prantskevichene I., Kairite A. THE INFLUENCE OF THE SILICON CARBIDE AGGREGATE CRUMBLED UP BY MEANS OF DIFFERENT METHODS ON THE HEAT-RESISTANT MIDDLE-CEMENT CASTABLE'S PROPERTIES. NOVYE OGNEUPORY (NEW REFRACTORIES). 2018;(3):50-56. https://doi.org/10.17073/1683-4518-2018-3-50-56
Refbacks
- There are currently no refbacks.