.png)
.png)
Email this article 
EFFECT OF THE HIGHLY-DISPERSED ADDITIVES PRODUCTION METHOD ON THE CORUNDUM CERAMICS PROPERTIES
https://doi.org/10.17073/1683-4518-2017-11-45-48
Abstract
The investigating results are given in the article for both the sintering and the corundum ceramics' properties change depending on the inserted highdispersed Al2O3's content and kind. The samples were prepared by means of the slurry casting and were sintered at various temperatures. It was established that all else being equal the highly-dispersed sphericalshaped powders are the most advantageous to use for the corundum ceramics' physical and mechanical properties improvement. The shape of the highlydispersed powder doesn't influence significantly on the temperature reducing while preparing of the dense ceramics. Ill. 4. Ref. 12. Tab. 2.
About the Authors
Yu. I. KomolikovRussian Federation
I. D. Kashcheev
Russian Federation
V. I. Pudov
Russian Federation
References
1. Кайнарский, И. С. Корундовые огнеупоры и керамика / И. С. Кайнарский, Э. В. Дегтярева, И. Г. Орлова. ― М. : Металлургия, 1981. ― 267 с.
2. Эванс, А. Г. Конструкционная керамика / А. Г. Эванс, Т. Г. Лэнгдон. ― М. : Металлургия, 1980. ― 256 с.
3. Badmos, Adebayo Y. Characterization of structural alumina ceramics used in ballistic armour and wear applications / Adebayo Y. Badmos, Douglas G. Ivey // J. Mater. Sci. 2001. ― № 6. ― Р. 4995‒5005.
4. Yan, Man F. Effect of physical, chemical, and kinetic factors on ceramic sintering / Man F. Yan // Advance in Ceramics. Vol. 21: Cer. Powder Science, Copyright, The Am. Ceram. Soc. ― 1987.
5. Hsu, Yung-Fu. Effects of additives on the densification and microstructural evolution of fine Al2O3 powder / Yung-Fu Hsu, Sea-Fue Wang, Ta-Wui Cheng // Mater. Sci. Eng. ― 2003. ― Vol. 362. ― P. 300‒308.
6. Zeng, Wenming. Sintering kinetics of Al2O3 powder / Wenming Zeng, Lian Gao, Linhua Gui, Jinkun Guo // Ceram. Int. ― 1999. ― Vol. 25. ― P. 723‒726.
7. Sathiyakuman, M. Influence of additives on density, microstructure and mechanical properties of alumina / M. Sathiyakuman, F. B. Gnanam // J. Mater. Process. Technol. ― 2003. ― Vol. 133. ― P. 282‒286.
8. Комоликов, Ю. И. Выбор материала для формирования керамических пористых диафрагм / Ю. И. Комоликов, И. Д. Кащеев // Новые огнеупоры. ― 2012. ― № 12. ― C. 35‒38.
9. Komolikov, Yu. I. Choice of material for molding porous ceramic diaphragms / Yu. I. Komolikov, I. D. Kashcheev // Refractories and Industrial Ceramics. ― 2012. ― Vol. 53, № 6. ― P. 404‒407.
10. Kotov, Yu. A. Electric explosion of wires as a method for preparation of nanopowders / Yu. A. Kotov // J. Nanopart. Res. ― 2003. ― Vol. 5, № 5/6. ― P. 539‒550.
11. Sheppard, L. M. Low-temperature synthesis of ceramics / L. M. Sheppard // Adv. Vat. and Process, inc. Metal. Progr. ― 1986. ― Vol. 130, № 5. ― Р. 47‒51.
12. Segal, D. Chemical synthesis of ceramic materials / D. Segal // J. Mater. Chem. ― 1997 ― № 7 (8). ― Р. 1297‒1305.
13. Комоликов, Ю. И. Термическое расширение композиционной керамики системы диоксид циркония – оксид алюминия / Ю. И. Комоликов, И. Д. Кащеев, В. Р. Хрустов // Новые огнеупоры. ― 2016. ― № 9. ― С. 59‒62.
14. Komolikov, Yu. I. Thermal expansion of composite ceramic of the zirconium dioxide – aluminum oxide system / Yu. I. Komolikov, I. D. Kashcheev, V. R. Khrustov // Refractories and Industrial Ceramics. ― 2017. ― Vol. 57, № 5. ― P. 516‒519.
Supplementary files
For citation: Komolikov Y.I., Kashcheev I.D., Pudov V.I. EFFECT OF THE HIGHLY-DISPERSED ADDITIVES PRODUCTION METHOD ON THE CORUNDUM CERAMICS PROPERTIES NOVYE OGNEUPORY (NEW REFRACTORIES). 2017;(11):45-48. https://doi.org/10.17073/1683-4518-2017-11-45-48
Refbacks
- There are currently no refbacks.