.png)
.png)
Email this article 
ORE-THERMAL FURNACE LINING WITH INCREASED RESISTANCE
https://doi.org/10.17073/1683-4518-2015-5-7-10
Abstract
The work objective was to analyze both the low resistance of the argillite fusion ore-thermal furnace’ lining and the lining wear mechanism. As a result the new ore-thermal furnace design was developed which provided its safe and failure-free operation; allowed to increase both the time utilization rate (from 0,33 to 0,73) and the ore processing volume, as well as it enabled to scale back both the repair number and the electric energy consumption. The lining service life rose from 3 to 16 months. The similar lining with carbon blocks in the ore-thermal furnace’s bottom was introduced at the lead production shop of Leninogorsk Polymetallic Works. Ill. 3. Ref. 4. Tab. 2.
About the Authors
V. V. SlovikovskiiRussian Federation
A. V. Gulyaeva
Russian Federation
References
1. Strimple R. A., Beerhan C. R., Muhlhausen J. F. // J. of Metals. — 1974. — Vol. 26, № 11. — Р. 33, 35, 36, 39–41.
2. А. с 145602 СССР / К. К. Стрелов // Открытия. Изобретения. Промышленные образцы. Товарные знаки. — 1962. — № 6. — C. 28.
3. А. с. 145662 СССР / А. С. Сухариер, А. И. Коровкин, В. Т. Табалаев [и др.] // Открытия. Изобретения. Промышленные образцы. Товарные знаки. — 1962. — № 6. — C. 38.
4. Биркле, В. Б. Применение комбинированной футеровки в конвертерах медного производства // Г. В. Б. Биркле, В. В. Словиковский, Т. А. Данилова [и др.] // Огнеупоры. — 1986. — № 5. — C. 46–49.
5. Birkle, G. V. B. The use of a combined lining in copper production converters / G. V. B. Birkle, V. V. Slovikovskii, T. A. Danilova [et al.] // Refractories. — 1986. — Vol. 27, № 5–6. — Р. 294–297.
Supplementary files
For citation: Slovikovskii V.V., Gulyaeva A.V. ORE-THERMAL FURNACE LINING WITH INCREASED RESISTANCE. NOVYE OGNEUPORY (NEW REFRACTORIES). 2015;(5):7-10. https://doi.org/10.17073/1683-4518-2015-5-7-10
Refbacks
- There are currently no refbacks.