TECHNOLOGICAL CHARACTERISTICS OF Β-SPODUMENE GLASS- CERAMICS SYNTHESIS. PART 3. THE INVESTIGATION OF REWORKING POSSIBILITY OF THE FIRED Β-SPODUMENE MATERIAL

E. I. Suzdal'tsev

doi:10.17073/1683-4518-2015-4-34-37

TECHNOLOGICAL CHARACTERISTICS OF Β-SPODUMENE GLASS- CERAMICS SYNTHESIS. PART 3. THE INVESTIGATION OF REWORKING POSSIBILITY OF THE FIRED Β-SPODUMENE MATERIAL

E. I. Suzdal'tsev

https://doi.org/10.17073/1683-4518-2015-4-34-37

Full Text:

Abstract

The effective method is proposed in the article for process waste reworking after the glass-ceramics firing. The method provides the recycling of about third part of the initial raw materials together with essential increasing in productivity of the milling equipment. Ill. 1. Ref. 2. Tab. 3.

Keywords

raw grinding, stepwise milling equipment load, density, viscosity, slurry pH, castings' density and porosity,

About the Author

E. I. Suzdal'tsev

Обнинское научно-производственное предприятие «Технология», ОАО, Обнинск Калужская область
Russian Federation

References

1. Пат. 2366637 РФ, МПК С04В 35/19, С04В 33/28. Способ получения высокоплотных водных шликеров на основе литийалюмосиликатного стекла / Суздальцев Е. И., Русин М. Ю., Харитонов Д. В., Зайчук Т. В., Ипатова Н. И. ― № 2008102891/03 ; заявл. 25.01.08 ; опубл. 10.09.09, Бюл. № 25.

2. Пат. 2513072 РФ, МПК С04В 35/14. Способ получения высокоплотного водного шликера на основе кварцевого стекла / Суздальцев Е. И., Харитонов Д. В., Цветкова М. М., Савченко П. М., Русин М. Ю. ― № 2012154132/03 ; заявл. 13.12.12 ; опубл. 20.04.2014, Бюл. № 11.

Supplementary files

For citation: Suzdal'tsev E.I. TECHNOLOGICAL CHARACTERISTICS OF Β-SPODUMENE GLASS- CERAMICS SYNTHESIS. PART 3. THE INVESTIGATION OF REWORKING POSSIBILITY OF THE FIRED Β-SPODUMENE MATERIAL. NOVYE OGNEUPORY (NEW REFRACTORIES). 2015;(4):34-37. https://doi.org/10.17073/1683-4518-2015-4-34-37

Refbacks

There are currently no refbacks.

ISSN 1683-4518 (Print)

Username
Password