OXIDE CERAMICS SURFACE LAYER MODIFICATION BY MEANS OF CONTINUOUS LASER ACTION


https://doi.org/10.17073/1683-4518-2016-1-50-55

Full Text:




Abstract

The details of aluminum oxide based ceramics surface layer modification are investigated under the action of continuous-wave laser. The influence of the continuous laser  action  mode  on  both  the  formed  ionization track's  geometric parameters and  the  surface  layer morphology and imperfection is defined. The basic types and  characteristics are  determined for  the  periodic microstructures formed in the ceramics surface layer.

About the Author

V. V. Kuzin
Московский государственный технологический университет «Станкин», Москва
Russian Federation


References

1. Costil, S. Surface modification of ceramic matrix composites induced by laser treatment / S. Costil, S. Lukat, C. Langlade, C. Coddet // Applied Surface Science. ― 2008. ― Vol. 255. ― Р. 2425-2432.

2. Samant, Anoop N. Laser machining of structural ceramics ― а review / Anoop N. Samant, Narendra B. Dahotre // Journal of the European Ceramic Society. ― 2009. ― Vol. 29. ― Р. 969-993.

3. Yang, Jinlong. New laser machining technology of Al2O3 ceramic with complex shape / Jinlong Yang, Juanli Yu, Yuanyuan Cui, Yong Huang // Ceramics International. ― 2012. ― Vol. 38. ― Р. 3643-3648.

4. Пячин, С. А. Новые технологии получения функциональных наноматериалов: лазерная абляция, электроискровое воздействие / С. А. Пячин, М. А. Пугачевский, А. Б. Пагубко. ― Хабаровск : ТОГУ, 2014. ― 38 с.

5. Кузин, В. В. Эффективное применение высокоплотной керамики для изготовления режущих и деформирующих инструментов / В. В. Кузин // Новые огнеупоры. ― 2010. ― № 12. ― С. 13-19. Kuzin, V. V. Effective use of high density ceramic for manufacture of cutting and working tools / V. V. Kuzin // Refractories and Industrial Ceramics. ― 2010. ― Vol. 51, № 6. ― Р. 421-426.

6. Кузин, В. В. Изнашивание режущих пластин из нитридной керамики при обработке отливок из серых чугунов / В. В. Кузин, С. Н. Григорьев, С. Ю. Федоров // Вестник машиностроения. ― 2013. ― № 3. ― С. 58-62. Kuzin, V. V. Wear of nitride ceramic inserts in machining gray cast iron castings / V. V. Kuzin, S. N. Grigor’ev, S. Yu. Fedorov // Russian Engineering Research. ― 2013. ― Vol. 33, № 6. ― Р. 343-347.

7. Кузин, В. В. Воздействие импульсного лазерного излучения на поверхность керамики ВОК71 / В. В. Кузин, С. Н. Григорьев, М. Ю. Фёдоров [и др.] // Новые огнеупоры. ― 2015. ― № 7. ― С. 48-52. Kuzin, V. V. Effect of Pulsed Laser Radiation on the Surface of Ceramic VOК71 / V. V. Kuzin, S. N. Grigor’ev, M. Yu. Fedorov [et al.] // Refractories and Industrial Ceramics. ― 2015. ― Vol. 56, № 4. ― Р. 390-393.

8. Кузин, В. В. Особенности воздействия импульсного лазерного излучения на поверхность керамики ВОК71 в воде / В. В. Кузин, М. Р. Портной, С. Ю. Фёдоров, Н. Р. Портной // Новые огнеупоры. ― 2015. ― № 8. ― С. 43-46. Kuzin, V. V. Features of pulsed laser radiation action on a ceramic VOK71 surface in water / V. V. Kuzin, M. R. Portnoi, S. Yu. Fedorov, N. R. Portnoi // Refractories and Industrial Ceramics. ― 2015. ― Vol. 56, № 4. ― Р. 394-397.

9. Kuzin, V. Surface modification of zirconia (Y-TZP) ceramics induced by pulsed laser machining / V. Kuzin, S. Grigoriev, M. Fedorov // Applied Mechanics and Materials. ― 2015. ― Vol. 752/753. ― P. 481-484.

10. Кузин, В. В. Влияние теплового потока на неоднородность напряжений в поверхности оксидной керамики с развитым рельефом / В. В. Кузин, С. Н. Григорьев, М. Р. Портной // Новые огнеупоры. ― 2015. ― № 6. ― С. 66-68. Kuzin, V. V. The influence of heat flow on the nonuniformity of the stresses in the surface of oxide ceramic with fully developed relief / V. V. Kuzin, S. N. Grigor’ev, M. R. Portnoi // Refractories and Industrial Ceramics. ― 2015. ― Vol. 56, № 3. ― Р. 314-317.

11. Кузин, В. В. Неоднородность напряжений в поверхностном слое керамики под действием внешней нагрузки. Часть 2. Влияние теплового нагружения / В. В. Кузин, С. Н. Григорьев, В. Н. Ермолин // Новые огнеупоры. ― 2013. ― № 12. ― С. 35-39. Kuzin, V. V. Stress inhomogeneity in a ceramic surface layer under action of an external load. Part 2. Effect of thermal loading / V. V. Kuzin, S. N. Grigor’ev, V. N. Ermolin // Refractories and Industrial Ceramics. ― 2014. ― Vol. 54, № 6. ― Р. 497-501.

12. Кузин, В. В. Роль теплового фактора в механизме износа керамических инструментов. Часть 2. Микроуровень / В. В. Кузин, С. Н. Григорьев, М. Ю. Федоров // Трение и износ. ― 2015. ― № 1. ― С. 50-55. Kuzin, V. V. Role of the thermal factor in the wear mechanism of ceramic tools. Part 2. Microlevel / V. V. Kuzin, S. N. Grigoriev, M. Yu. Fedorov // Journal of Friction and Wear. ― 2015. ― Vol. 36. ― Р. 40-44.


Supplementary files

For citation: Kuzin V.V. OXIDE CERAMICS SURFACE LAYER MODIFICATION BY MEANS OF CONTINUOUS LASER ACTION. NOVYE OGNEUPORY (NEW REFRACTORIES). 2016;1(1):50-55. https://doi.org/10.17073/1683-4518-2016-1-50-55

Views: 225

Refbacks

  • There are currently no refbacks.


ISSN 1683-4518 (Print)