The correlation of the diamond grinding parameters with the ZrO2-ceramics surface condition

V. V. Kuzin; S. Yu. Fedorov; S. N. Grigoriev

doi:10.17073/1683-4518-2016-11-60-65

The correlation of the diamond grinding parameters with the ZrO2-ceramics surface condition

V. V. Kuzin, S. Yu. Fedorov, S. N. Grigoriev

https://doi.org/10.17073/1683-4518-2016-11-60-65

Full Text:

Abstract

The investigating results are given on the influence of the diamond wheels flat grinding parameters on the surface condition of the tetragonal polycrystalline zirconium dioxide partially stabilized by yttrium oxide (Y‒TZP). The correlation was established between the grinding depth, longitudinal and cross traverses and the waviness, morphology of the processed surface and surface layer structure of the zirconium dioxide ceramics. Ill. 5. Ref. 17.

Keywords

grinding, Y‒TZP-ceramics, roughness, waviness, ceramics surface layer morphology,

About the Authors

V. V. Kuzin

ФГБОУ ВО «Московский государственный технологический университет «Станкин»
Russian Federation

S. Yu. Fedorov

ФГБОУ ВО «Московский государственный технологический университет «Станкин»
Russian Federation

S. N. Grigoriev

ФГБОУ ВО «Московский государственный технологический университет «Станкин»
Russian Federation

References

1. Ramesh, S. Sintering behaviour and properties of graphene oxide-doped Y–TZP ceramics / S. Ramesh, M. Mohaymen Khan, H. C. Alexander Chee [et al.] // Ceramics International. ― 2016. ― Vol. 42, № 15. ― P. 1762‒1765.

2. Gui, J. Phase transformation and slow crack growth study of Y–TZP dental ceramic / J. Gui, Zh. Xie // Materials Science and Engineering: A. ― 2016. ― Vol. 676. ― P. 531‒535.

3. Pereira, G. K. R. Mechanical behavior of a Y–TZP ceramic for monolithic restorations: effect of grinding and low-temperature aging / G. K. R. Pereira, T. Silvestri, R. Camargo [et al.] // Materials Science and Engineering: C. ― 2016. ― Vol. 63. ― P. 70‒77.

4. Holthausa grosse, M. Micromachining of ceramic surfaces: hydroxyapatite and zirconia / M. Holthausa grosse, S. Twardy, J. Stolle [et al.] // Journal of Materials Processing Technology. ― 2012. ― Vol. 212. ― P. 614‒624.

5. Kuzin, V. Surface modification of zirconia (Y–TZP) ceramics induced by pulsed laser machining / V. Kuzin, S. Grigoriev, M. Fedorov [et al.] // Applied Mechanics and Materials. ― 2015. ― Vols. 752/753. ― P. 481‒484.

6. Anand, P. S. P. Grinding behavior of yttrium partially stabilized zirconia using diamond grinding wheel / P. S. P. Anand, N. Arunachalam, L. Vijayaraghavan // Advanced Materials Research. ― 2016. ― Vol. 1136. ― P. 15‒20.

7. Pereira, G. K. R. Effect of grinding with diamond-disc and -bur on the mechanical behavior of a Y–TZP ceramic / G. K. R. Pereira, M. Amaral, R. Simoneti [et al.] // Journal of the Mechanical Behavior of Biomedical Materials. ― 2014. ― Vol. 37. ― P. 133‒140.

8. Canneto, J.-J. Grinding damage assessment on four high-strength ceramics / J.-J. Canneto, M. Cattani- Lorente, S. Durual [et al.] // Dental Materials. ― 2016. ― Vol. 32, № 2. ― P. 171‒182.

9. Ban, S. Surface properties of dental zirconia after clinical grinding and polishing / S. Ban, T. Sakakibara, K. Yoshihara [et al.] // Key Engineering Materials. ― 2013. ― Vols. 529/530. ― P. 501‒506.

10. Кузин, В. В. Взаимосвязь режимов алмазного шлифования с состоянием поверхности Al2O3-керамики /В. В. Кузин, С. Ю. Фёдоров // Новые огнеупоры. ― 2016. ― № 7. ― С. 65‒70.

11. Кузин, В. В. Взаимосвязь режимов алмазного шлифования с состоянием поверхности Al2O3‒TiC-керамики / В. В. Кузин, С. Ю. Фёдоров // Новые огнеупоры. ― 2016. ― № 9. ― С. 63‒68.

12. Kuzin, V. A model of forming the surface layer of ceramic parts based on silicon nitride in the grinding process / V. Kuzin // Key Engineering Materials. ― 2012. ― Vol. 496. Precision Machining. ― Р. 127‒131.

13. Кузин, В. В. Повышение эксплуатационной стабильности режущих инструментов из нитридной керамики за счет оптимизации условий их заточки / В. В. Кузин // Вестник машиностроения. ― 2003. ― № 12. ― С. 41‒45. Kuzin, V. V. Increasing the operational stability of nitride-ceramic cutters by optimizing their grinding conditions / V. V. Kuzin // Russian Engineering Research. ― 2003. ― Vol. 23, № 12. ― Р. 32‒36.

14. Kuzin, V. Designing of details taking into account degradation of structural ceramics at exploitation / V. Kuzin, S. Grigoriev, M. Volosova, M. Fedorov // Applied Mechanics and Materials. ― 2015. ― Vols. 752/753. ― P. 268‒271.

15. Кузин, В. В. Технология механической обработки деталей из высокоогнеупорной керамики на основе нитрида кремния / В. В. Кузин // Новые огнеупоры. ― 2006. ― № 8. ― С. 19‒24. Kuzin, V. V. Technology for machining highrefractory ceramic parts based on silicon nitride / V. V. Kuzin // Refractories and Industrial Ceramics. ― 2006. ― Vol. 47, № 4. ― P. 204‒208.

16. Kuzin, V. Surface defects formation in grinding of silicon nitride ceramics / V. Kuzin, S. Grigoriev, S. Fedorov, M. Fedorov // Applied Mechanics and Materials. ― 2015. ― Vols. 752/753. ― Р. 402‒406.

17. Кузин, В. В. Технологические особенности алмазного шлифования деталей из нитридной керамики /В. В. Кузин // Вестник машиностроения. ― 2004. ― № 1. ― С. 37‒41. Kuzin, V. V. Technological aspects of diamond grinding of the nitride ceramics / V. V. Kuzin // Russian Engineering Research. ― 2004. ― Vol. 24, № 1. ― Р. 23‒28. ◼

Supplementary files

For citation: Kuzin V.V., Fedorov S.Y., Grigoriev S.N. The correlation of the diamond grinding parameters with the ZrO2-ceramics surface condition. NOVYE OGNEUPORY (NEW REFRACTORIES). 2016;(11):60-65. https://doi.org/10.17073/1683-4518-2016-11-60-65

Refbacks

There are currently no refbacks.

ISSN 1683-4518 (Print)

Username
Password