The porcelain addition's influence on the electrofused corundum porous ceramics


https://doi.org/10.17073/1683-4518-2016-11-43-47

Full Text:




Abstract

The porous ceramics was obtained out of the porcelain doped electrofused corundum (EFC) with the dispersion of 0,5 millimeters. The compositions with different ration EFC/porcelain: 99/1, 97/3, 95/5, 93/7 и 90/10. The rectangular shaped samples 40×7×6,5 mm were
produced by means of uniaxial semidry pressing of 25 and 50 MPa, followed by the burning at 1350 and 1450 °C. The opened porosity varied from 22 to 33 %, the ultimate
bending strength varied from 1,1 to 9,3 MPa. The porous ceramics is promising for using in filters and the bottom layers of ceramic membranes. Ill. 3. Ref. 11.

About the Authors

A. V. Belyakov
ФГБОУ ВО «Российский химико-технологический университет им. Д. И. Менделеева»
Russian Federation


U. Zo E. Mo
ФГБОУ ВО «Российский химико-технологический университет им. Д. И. Менделеева»
Russian Federation


Min Ie Aung
ФГБОУ ВО «Российский химико-технологический университет им. Д. И. Менделеева»
Russian Federation


N. A. Popova
ФГБОУ ВО «Российский химико-технологический университет им. Д. И. Менделеева»
Russian Federation


References

1. Гузман, И. Я. Высокоогнеупорная пористая керамика / И. Я. Гузман. ― М. : Металлургия, 1971. ― 283 с.

2. Беркман, А. С. Пористая проницаемая керамика /А. С. Беркман. ― М. : Стройиздат, 1969. ― 170 с.

3. Rice, R. W. Porosity of ceramics / R. W. Rice. ― New York : Marcel Dekker, Inc., 1998. ― 539 p.

4. Андрианов, Н. Т. Химическая технология керамики: уч. пособие для вузов / Н. Т. Андрианов, В. Л. Балкевич, А. В. Беляков [и др.]. ― М. : Стройматериалы, 2011. ― 496 с.

5. Беляков, А. В. Регулирование открытой пористости и прочности варьированием зернового состава в керамике на основе электроплавленого корунда с фарфоровой связкой / А. В. Беляков, Зо Е Мо У, Н. А. Попова, Йе Аунг Мин, Чжо Лвин У // Новые огнеупоры. ― 2016. ― № 2. ― С. 34‒37. Belyakov, A. V. Varying the granulometric composition of an electrofused-corundum-based ceramic with a porcelain binder to control its open porosity and strength / A. V. Belyakov, Zaw Ye Maw Oo, N. A. Popova, Ye Aung Min, Kyaw Lwin Oo // Refractories and Industrial Ceramics. ― 2016. ― Vol. 57, № 1. ― P. 77‒80.

6. Bruno, G. Thermal and mechanical response of industrial porous ceramics / G. Bruno, I. Pozdnyakova, A. M. Efremov [et al.] // Mater. Sci. Forum. ― 2010. ― Vol. 652. ― P. 191‒196.

7. Официальный сайт. Производственно-торговая фирма «Керамика Гжели». ― http://ceramgzhel.ru/poleznaya-infor/markirovka-keramicheskix.html

8. Андрианов, Н. Т. Практикум по химической технологии керамики : уч. пособие для вузов / Н. Т. Андрианов, В. Л. Балкевич, А. В. Беляков [и др.] ; под ред. И. Я. Гузмана. ― М. : Стройматериалы, 2005. ― 336 с.

9. Беляков, А. В. Эволюция структуры в переделах технологии керамики / А. В. Беляков, В. С. Бакунов //Новые огнеупоры. ― 2006. ― № 1. ― С. 56‒61. Belyakov, A. V. Structural evolution in ceramic technology and processing / A. V. Belyakov, V. S. Bakunov // Refractories and Industrial Ceramics. ― 2006. ― Vol. 47, № 1. ― P. 48‒52.

10. Беляков, А. В. Эволюция структуры в переделах технологии керамики / А. В. Беляков, В. С. Бакунов //Новые огнеупоры. ― 2006. ― № 2. ― С. 55‒62. Belyakov, A. V. Structural evolution in ceramic technology and processing / A. V. Belyakov, V. S. Bakunov // Refractories and Industrial Ceramics. ― 2006. ― Vol. 47, № 2. ― P. 110‒115.

11. Беляков, А. В. Синергетический и квазихимический подходы в технологии керамики / А. В. Беляков //Стекло и керамика. ― 2003. ― № 9. ― С. 21‒27. Belyakov, A. V. Synergetic and Quasichemical Approaches in Ceramic Technology (A Review) / A. V. Belyakov // Glass and Ceramics. ― 2003. ― Vol. 60, № 9/10. ― P. 274‒279


Supplementary files

For citation: Belyakov A.V., Zo E. Mo U., Ie Aung M., Popova N.A. The porcelain addition's influence on the electrofused corundum porous ceramics. NOVYE OGNEUPORY (NEW REFRACTORIES). 2016;(11):43-47. https://doi.org/10.17073/1683-4518-2016-11-43-47

Views: 208

Refbacks

  • There are currently no refbacks.


ISSN 1683-4518 (Print)