.png)
.png)
Email this article 
The investigation of the porous silicon nitride ceramics obtained by 3D-printing technology
https://doi.org/10.17073/1683-4518-2016-11-33-37
Abstract
experimental 3D-printing installation was used which was working on the binder injection technology. The synthesized samples have high porosity and consist mainly of α-Si3N4 filaments. Ill. 5. Ref. 12. Tab. 1.
About the Authors
L. N. RabinskiiRussian Federation
A. V. Ripetskii
Russian Federation
V. A. Pogodin
Russian Federation
S. A. Sitnikov
Russian Federation
Yu. O. Solyaev
Russian Federation
References
1. Андриевский, Р. А. Нитридкремний и материалы на его основе / Р. А. Андриевский, И. И. Спивак. ― М. : Металлургия, 1984. ― 136 с.
2. Krstic, Z. Silicon nitride: the engineering material of the future / Z. Krstic, V. D. Krstic // J. Mater. Sci. ― 2012. ― Vol. 47. ― Р. 535‒552.
3. Rodrigues, S. J. Solid freeform fabrication of functional silicon nitride ceramics by laminated object manufacturing. Proceedings of the SFF Symposium / S. J. Rodrigues, R. P. Chartoff, D. А. Klosterman [et al.]. ― Texas, 2000. ― Р. 1‒8.
4. Liu, H.-C. RP of SiN burner arrays via assembly mould SDM / H.-C. Liu, S. Lee, S. Kang [et al.] // Rapid Prototyping Journal. ― 2004. ― Vol. 10, № 4. ― Р. 239‒246.
5. Iyer, S. Microstructural characterization and mechanical properties of Si3N4 formed by fused deposition of ceramics / S. Iyer, J. McIntosh, A. Bandyopadhyay [et al.] // International Journal of Applied Ceramic Technology. ― 2008. ― Vol. 5, № 2. ― Р. 127‒137.
6. Cappi, B. Direct inkjet printing of Si3N4: characterization of ink, green bodies and microstructure / B. Cappi, E. Özkol, J. Ebert, R. Telle // J. Europ. Ceram. Soc. ― 2008. ― Vol. 28, № 13. ― Р. 2625‒2628.
7. Cappi, B. Rheological properties of aqueous Si3N4 and MoSi2 suspensions tailor-made for direct inkjet printing /B. Cappi, J. Ebert, R. Telle // J. Amer. Ceram. Soc. ― 2011. ― Vol. 94, № 1. ― Р. 111‒116.
8. Li, X. Effect of chemical vapor infiltration of Si3N4 on the mechanical and dielectric properties of porous Si3N4 ceramic fabricated by a technique combining 3-D printing and pressureless sintering / X. Li, L. Zhang, X. Yin // Scripta Materialia. ― 2012a. ― Vol. 67, № 4. ― Р.380‒383.
9. Li, X. Microstructure and mechanical properties of three porous Si3N4 ceramics fabricated by different techniques / X. Li, L. Zhang, X. Yin // Materials Science and Engineering: A. ― 2012b. ― Vol. 549. ― P. 43‒49.
10. Duan, W. Absorption properties of twinned SiC nanowires reinforced Si3N4 composites fabricated by 3D-printing / W. Duan, X. Yin, F. Cao [et al.] // Materials Letters. ― 2015. ― Vol. 159. ― P. 257‒260.
11. Liu, S. Feasibility of preparing of silicon nitride ceramics components by aqueous tape casting in combination with laminated object manufacturing / S. Liu, F. Ye, L. Liu, Q. Liu // Materials & Design. ― 2015. ― Vol. 66. ― P. 331‒335.
12. Gibson, I. Additive manufacturing technologies. 3D printing, rapid prototyping, and direct digital manufacturing / I. Gibson, D. W. Rosen, B. Stucker. ― Springer, 2013. ― 499 p.
Supplementary files
For citation: Rabinskii L.N., Ripetskii A.V., Pogodin V.A., Sitnikov S.A., Solyaev Y.O. The investigation of the porous silicon nitride ceramics obtained by 3D-printing technology. NOVYE OGNEUPORY (NEW REFRACTORIES). 2016;(11):33-37. https://doi.org/10.17073/1683-4518-2016-11-33-37
Refbacks
- There are currently no refbacks.