.png)
.png)
Email this article 
PACKING AND PHASE FORMATION REGULARITIES IN TI‒SIC‒C SYSTEM AT SPARK-PLASMA SINTERING
https://doi.org/10.17073/1683-4518-2015-4-16- 19
Abstract
The investigating results are given in the article for the packing and phase formation in the mechanically activated powder system based on titanium, silicon carbide and carbon at various conditions of the spark-plasma sintering. It was shown that the spark-plasma sintering applied to the mechanically activated 3Ti‒1,25SiC‒0,75C molecular ratio mixture at 1300 °C provides the forming of a dense material with maximal content of titanium carbosilicide. Consolidated material consists of plate-like structure Ti3SiC2 and micro- crystal TixCy grains. Ill. 5. Ref. 16.
About the Authors
V. N. AntsiferovRussian Federation
M. N. Kachenyuk
Russian Federation
A. A. Smetkin
Russian Federation
References
1. Barsoum, M. W. The MN+1AXN: a new class of solids: thermodynamically stable nanolaminates / M. W. Barsoum // Prog. Solid St. Chem. ― 2000. ― Vol. 28. ― P. 201‒281.
2. Sarkar, D. Understanding the fretting wear of Ti3SiC2 / D. Sarkar, B. V. Manoj Kumar, B. Basu // J. Europ. Ceram. Soc. ― 2006. ― Vol. 26, № 13. ― P. 2441‒2452.
3. Barsoum, M. W. Synthesis and characterization of a remarkable ceramic: Ti3SiC2 / M. W. Barsoum, T. ElRaghy // J. Amer. Ceram. Soc. ― 1996. ― Vol. 79, № 7. ― P. 1953‒1956.
4. Barsoum, M. W. Thermal properties of Ti3SiC2 / M. W. Barsoum, T. El-Raghy, C. J. Rawn [et al.] // J. Physics and Chemistry of Solids. ― 1999. ― Vol. 60, № 4. ― P. 429―439.
5. Barsoum, M. W. Formation and thermal stability of amorphous Ti‒Si‒C alloys / M. W. Barsoum, D. Brodkin, T. El-Raghy // Scripta Materialia. ― 1997. ― Vol. 36, № 5. ― P. 535‒541.
6. Chen, Deqiang. Rapid synthesis of TiC/Ti3SiC2 composites by laser melting / Deqiang Chen, Xiangjun Tian, Huaming Wang, Zheng Huang // International Journal of Refractory Metals and Hard Materials. ― 2014. ― Vol. 47. ― P. 102‒107.
7. Надуткин, А. В. Керамические композиты на основе Ti3SiC2 для изделий сложной формы / А. В. Надуткин, П. В. Истомин, Ю. И. Рябков [и др.] // Конструкции из композиционных материалов. ― 2007. ― № 1. ― С. 50‒56.
8. Gao, N. F. Dense Ti3SiC2 prepared by reactive HIP/ N. F. Gao, Y. Miyamoto, D. Zhang // J. Materials Science. ― 1999. ― Vol. 34, № 18. ― P. 4385‒4392.
9. Sun, Z. M. Ternary compound Ti3SiC2. Part I: pulse discharge sintering synthesis / Z. M. Sun, Z. F. Zhang, H. Hashimoto [et al.] // Materials Transactions. ― 2002. ― Vol. 43, № 3. ― P. 428‒431.
10. El Saeed, M. A. Influence of SPS parameters on the density and mechanical properties of sintered Ti3SiC2 powders / M. A. El Saeed, F. A. Deorsola, R. M. Rashad // International Journal of Refractory Metals and Hard Materials. ― 2013. ― Vol. 41. ― P. 48‒53.
11. Meng, F. Investigation of formation mechanism of Ti3SiC2 by self-propagating high-temperature synthesis / F. Meng, B. Liang, M. Wang // International Journal of Refractory Metals and Hard Materials. ― 2013. ― Vol. 41. ― P. 152‒161.
12. ГОСТ 2409‒95. Огнеупоры. Метод определения кажущейся плотности, открытой и общей пористости, водопоглощения.
13. Лившиц, Б. Г. Металлография / Б. Г. Лившиц. ― М. : Металлургия, 1996. ― 236 с.
14. Беккерт, М. Способы металлографического травления : справочник / М. Беккерт, Х. Клемм. ― М. : Металлургия, 1988. ― C. 198, 199.
15. Истомин, П. В. Получение Ti3SiC2 / П. В. Истомин, А. В. Надуткин, Ю. И. Рябков [и др.] // Неорганические материалы. ― 2006. ― № 42. ― C. 250‒255.
16. Каченюк, М. Н. Получение композиционного материала на основе Ti3SiC2 методом механосинтеза / М. Н. Каченюк // Вопросы материаловедения. ― 2008. ― № 2. ― С. 210‒218.
Supplementary files
For citation: Antsiferov V.N., Kachenyuk M.N., Smetkin A.A. PACKING AND PHASE FORMATION REGULARITIES IN TI‒SIC‒C SYSTEM AT SPARK-PLASMA SINTERING. NOVYE OGNEUPORY (NEW REFRACTORIES). 2015;(4):16- 19. https://doi.org/10.17073/1683-4518-2015-4-16- 19
Refbacks
- There are currently no refbacks.