Generalized analysis of the glass-melting furnaces thermal performance

V. Ya. Dzyuzer

doi:10.17073/1683-4518-2017-2-15-18

Generalized analysis of the glass-melting furnaces thermal performance

V. Ya. Dzyuzer

https://doi.org/10.17073/1683-4518-2017-2-15-18

Full Text:

Abstract

The new approach is proposed in the article to the analyses of the glass-melting furnaces thermal performance. The generalized heat balance equation was obtained for the glass-melting furnace within the boundaries of the chimney‒molten glass channels. The temperature boundary conditions were formulated for the mediums which heat contents define the expensive items of the heat balance. It was shown how the specific heat rate per 1 kg of melting glass influences the percentage composition of the generalized heat balance expense items. The calculation of the heat balance was carried out for the melting zone of the container glass furnace with a capacity of 320 tons per day under the specific heat consumption 1000 large calories per 1 kg. Ill. 2. Ref. 7. Tab. 2.

Keywords

glass-melting furnace, heat balance, energy efficiency, temperature, lining,

About the Author

V. Ya. Dzyuzer

ФГАОУ ВО «Уральский федеральный университет»
Russian Federation

References

1. Дзюзер, В. Я. Теоретические затраты теплоты на стекловарение / В. Я. Дзюзер, В. С. Швыдкий, Е. Б. Садыков // Стекло и керамика. ― 2012. ― № 7. ― С. 3‒5. Dzyuzer, V. Ya. Theoretical heat consumption in glassmaking / V. Ya. Dzyuzer, V. S. Shvydkii, E. B. Sadykov // Glass and Ceram. ― 2012. ― Vol. 69, № 7/8. ― P. 217‒219.

2. Дзюзер, В. Я. Способы повышения энергоэффективности стекловаренных печей / В. Я. Дзюзер // Стекло и керамика. ― 2012. ― № 1. ― С. 11‒14.

3. Beerkens, R. Analysis of elementary process steps in industrial glass melting tanks ‒ some ideas on innovations in industrial glass melting / R. Beerkens // Ceramics ‒ Silikaty. ― 2008. ― Vol. 52, № 4. ― Р. 206‒217.

4. Khoshmanesh, K. Reduction of fuel consumption in an industrial glass melting furnace / K. Khoshmanesh, A. Z. Kouzani, S. Nahavandi, A. Abbassi // Conference Paper: TENCON 2007 ‒ 2007 IEEE Region 10 Conference (DOI: 10.1109/TENCON 2007.4428958).

5. Дзюзер, В. Я. Энергоэффективная структура кладки высокотемпературного регенератора стекловаренной печи / В. Я. Дзюзер // Новые огнеупоры. ― 2014. ― № 2. ― С. 3‒6. Dzyuzer, V. Ya. Energy-efficient structure for the lining of the high-temperature regenerator of a glassmaking furnace / V. Ya. Dzyuzer // Refractories and Industrial Ceramics. ― 2014. ― Vol. 55, № 1. ― P. 1‒4.

6. Дзюзер, В. Я. Граничные условия для расчета футеровки стекловаренной печи с инновационными параметрами технической эффективности / В. Я. Дзюзер, В. С. Швыдкий // Новые огнеупоры. ― 2015. ― № 12. ― С. 9‒12. Dzyuzer, V. Ya. Boundary conditions for designing the lining of a glass-founding furnace with innovative parameters to improve technical efficiency / V. Ya. Dzyuzer, V. S. Shvydkii // Refractories and Industrial Ceramics. ― 2016. ― Vol. 56, № 6. ― P. 597‒600.

7. Дзюзер, В. Я. Проектирование энергоэффективных стекловаренных печей : монография / В. Я. Дзюзер, В. С. Швыдкий. ― М. : Теплотехник, 2009. ― 340 с.

Supplementary files

For citation: Dzyuzer V.Y. Generalized analysis of the glass-melting furnaces thermal performance. NOVYE OGNEUPORY (NEW REFRACTORIES). 2017;(2):15-18. https://doi.org/10.17073/1683-4518-2017-2-15-18

Refbacks

There are currently no refbacks.

ISSN 1683-4518 (Print)

Username
Password