ПОЛУЧЕНИЕ И СВОЙСТВА НИЗКОУГЛЕРОДИСТЫХ КОМПОЗИТНЫХ ОГНЕУПОРОВ СИСТЕМЫ Al2O3-ZrO2-SiC-C, СОДЕРЖАЩИХ КЕРАМИЧЕСКУЮ ФАЗУ LaAl11O18


https://doi.org/10.17073/1683-4518-2015-1-24-31

Полный текст:




Аннотация

В ходе спекания и реакции insitu были получены низкоуглеродистые алюмоциркониевокарбидкрем-нийуглеродистые композитные огнеупоры системы Al2O3-ZrO2-SiC-C (далее AZSC-огнеупоры), содержащие керамическую фазу гексаалюмината лантана LaAI11O18. Изучено влияние разных пропорций сырьевых компонентов, температуры спекания и количества добавки La2O3 на фазовый состав, микроструктуру, усадку, открытую пористость, кажущуюся плотность и предел прочности при сжатии AZSC-огнеупоров. AZSC-огнеупоры, обладающие хорошими показателями, можно изготовить в течение 3 ч при 1723 и 1773 K. В ходе процесса спекания происходит insitu реакция между ZrSiO4 и C и образуются t-ZrO2, c-ZrO2 и β-SiC; La2O3 вступает в реакцию с AI2O3 с образованием пластинок LaAI11O18 в корундовой матрице. Улучшение свойств AZSC-огнеупоров объясняется образованием в них t-ZrO2, c-ZrO2, β-SiC и LaAI11O18.


Об авторах

Бейюэ Ма
Северо-Восточный университет, Шеньян
Китай


Ин Ли
Северо-Восточный университет, Шеньян
Китай


Цян Чжуг
Университет Вуллонгонга, Вуллонгонг
Австралия


Гоцян Лю
Северо-Восточный университет, Шеньян
Китай


Дзинкунь Юй
Северо-Восточный университет, Шеньян
Китай


Список литературы

1. Roungos, V Improved thermal shock performance of AI2O3-C refractories due to nanoscaled additives / К Roungos, C. G. Aneziris // Ceram. Inter. — 2012. — Vol. 38, №2. — Р. 919-927.

2. Zhu, B. Q. Effect of ceramic bonding phases on the thermo-mechanical properties of AhO3-C refractories / B. Q. Zhu, Y. N. Zhu, X. C. Li, F. Zhao // Ceram. Inter. — 2013. — Vol. 39, № 6. — Р. 6069-6076.

3. Wang, Q. H. Strengthening mechanism of grapheme oxide nanosheets for AhO3-C refractories / Q. H. Wang, Y. W. Li, M. Luo [et al.] // Ceram. Inter. — 2014. — Vol. 40, №1. — Р. 163-172.

4. Gokce, A. S. The effect of antioxidants on the oxidation behaviour of magnesia-carbon refractory bricks / A. S. Gokce, C. Gurcan, S. Ozgen, S. Aydin // Ceram. Inter. — 2014. — Vol. 34, №2. — Р. 323-330.

5. Fan, H. B. Microstructures and mechanical properties of Al2O3-C refractories with silicon additive using different carbon sources / H. B. Fan, Y. W. Li, B. Sang // Mater. Sci. Eng. A. — 2011. — Vol. 528, №7/8. — Р. 3177-3185.

6. Li, L. Formation of ZrB2 in MgO-C composite materials using in-situ synthesis method / L. Li, Y. R. Hong, J. L. Sun [et al.] // J. Iron Steel Res. Int. — 2006. — Vol. 13, №1.— Р. 70-74.

7. Ma, B. Y. Synthesis of ZrO2-SiC composite powder and effect of its addition on properties of AhO3-C refractories / B. Y. Ma, J. K. Yu // T. Nonferr. Metal. Soc. — 2007. — Vol. 17, № 5. — Р. 996-1000.

8. Ma, B. Y. Synthesis of Al2O3-SiC composite and its effect on the properties of low-carbon MgO-C refractories / B. Y. Ma, Q. Zhu, Y. Sun [et al.] // J. Mater. Sci. Technol. — 2010. — Vol. 26, №8. — Р.715-720.

9. Basu, S. Nozzle clogging behaviour of Ti-bearing Al-killed ultra low carbon steel / S. Basu, S. K. Choudhary, N. U. Girasen // ISIJ Int. — 2004. — Vol. 44, №10. — Р. 1653-1660.

10. Li, H. X. Current situation and development of refractories for clean steel production / H. X. Li // 1st China International Refractory Production and Application Conference, Guangzhou, China. — 2011. — Р. 193-200.

11. Luo, M. In situ formation of carbon nanotubes and ceramic whiskers in Al2O3-C refractories with addition of Ni-catalyzed phenolic resin / M. Luo, Y. W. Li, S. B. Sang [et al.] // Mater. Sci. Eng. A. — 2012. — Vol. 558. — P. 533-542.

12. Zhong, X. C. Refractory oxide-nonoxide composites / X. C. Zhong // Amer. Ceram. Soc. Bull. — 2007. — Vol. 86, №9. — Р. 62-66.

13. Guo, R. In situ formation of LaAlnO18 rodlike particles in ZTA ceramics and effect on the mechanical properties / R. Guo, D. Guo, Y. Chen [et al.] // Ceram. Inter. — 2002. — Vol. 28, № 7. — Р. 699-704.

14. Jin, X. H. Microstructure and mechanical performances of ZTA/LaAlnO^ composite prepared by a heterogeneous precipitation method / X. H. Jin, L. Gao // Mater. Sci. Eng. A. — 2003. — Vol. 360, № 1/2. — Р. 275-279.

15. Tripathi, H. S. Synthesis and densification behaviour of magnesium aluminate spinel: Effect of Dy2O3 / H. S. Tripathi, S. Singla, A. Ghosh // Ceram. Inter. — 2009. — Vol. 35, № 6. — Р. 2541-2544.

16. Palmero, P. Creep behaviour of alumina/YAG composites prepared by different sintering routes / P. Palmero, G. Fantozzi, F. Lomello [et al.] // Ceram. Inter. — 2012. — Vol. 338, № 1. — Р. 433-441.

17. He,X.L. Study of rare-earth oxide sintering additive systems for Spark Plasma Sintering AlN ceramics / X. L. He, F. Ye, H. J. Zhang, L. M. Liu // Mater. Sci. Eng. A. — 2010. — Vol. 527, № 20. — Р. 5268-5272.

18. Ma, B. Y. Preparation and sintering properties of zirconia-mullite-corundum composites using fly ash and zircon / B. Y. Ma, Y. Li, S. G. Cui, Y. C. Zhai // T. Nonferr. Metal. Soc. — 2010. — Vol. 20, № 12. — Р. 2331-2335.

19. Ma, B. Y. Phase composition of SiC-ZrO2 composite materials synthesized from zircon doped with La2O3 / B. Y. Ma, J. K. Yu // J. Rare Earth. — 2009. — Vol. 27, №5. — Р. 806-810.

20. Liang, Y. J. Handbook of thermodynamic data in inorganic (in Chin.) ; 2nd ed. / Y. J. Liang, Y. C. Che. — Shenyang : Northeastern University Press, 1994.

21. Chen, Z. Y. Chemical Thermodynamics of Refractories (in Chin.) ; 1st ed. / Z. Y. Chen. — Beijing : Metallurgical Industry Press, 2005.


Дополнительные файлы

Для цитирования: Ма Б., Ли И., Чжуг Ц., Лю Г., Юй Д. ПОЛУЧЕНИЕ И СВОЙСТВА НИЗКОУГЛЕРОДИСТЫХ КОМПОЗИТНЫХ ОГНЕУПОРОВ СИСТЕМЫ Al2O3-ZrO2-SiC-C, СОДЕРЖАЩИХ КЕРАМИЧЕСКУЮ ФАЗУ LaAl11O18. Новые огнеупоры. 2015;(1):24-31. https://doi.org/10.17073/1683-4518-2015-1-24-31

For citation: Ma B., Li Y., Zhu Q., Liu G., Yu J. PREPARATION AND PROPERTIES OF LOW-CARBON AL2O3-ZRO2-SIC-C COMPOSITE REFRACTORIES CON¬TAINING LAALUO18 CERAMIC PHASE. NOVYE OGNEUPORY (NEW REFRACTORIES). 2015;(1):24-31. (In Russ.) https://doi.org/10.17073/1683-4518-2015-1-24-31

Просмотров: 211

Обратные ссылки

  • Обратные ссылки не определены.


ISSN 1683-4518 (Print)