.png)
.png)
Email this article 
THE INFLUENCE OF THE CARBON FIBER ON THE MEDIUM-CEMENT HEAT-RESISTANT CONCRETE PROPERTIES
https://doi.org/10.17073/1683-4518-2014-8-45-48
Abstract
The investigation of the heat-resistant medium-cement concrete with the calcium-alumina aggregate is carried out in the article. It is established that the carbon fiber additional increases the concrete strength at the compression and promotes its thermal stability. When the concrete samples are heating at the velocity of 40 °C per minute up till the 1000 °C the explosive rupture doesn't take place only in the samples with polypropylene fiber. Ill. 6. Ref. 11. Tab. 1.
About the Authors
R. BorisLithuania
V. Antonovich
Lithuania
E. Spudulis
Belarus
A. Volochko
Lithuania
References
1. Алленштейн, Й. Огнеупорные материалы. Структура, свойства, испытания: справочник / Й. Алленштейн [и др.], под ред. Г. Роучка, Х. Вутнау ; пер. с нем. — М. : Интермет Инжиниринг, 2010. — 392 с.
2. Wojsa, J. Thermal shock resistance parameters for refractories / J. Wojsa, A. Wrona, K. Czechowska // Proceeding of the International Conference Refractories, Furnaces and Thermal insulations. Podbanske-High Tatras, Slovakia, 8-10 June 2004. — P. 27-32.
3. Peret, C. M. Polymeric fibers and the drying of refractory castables / C. M. Peret, R. Salomao, A. M. Zambon [et al.] // 58th Congresso Annual da ABM, 2003. — P. 1715-1724.
4. Innocentini, M. D. M. Permeability of fiber-containing refractory castables / M. D. M. Innocentini, R. Salomao, C. Ribeiro [et al.] // Amer. Ceram. Soc. Bull. — 2002. — Vol. 81, № 8. — P. 65-68.
5. Innocentini, M. D. M. Drying stages during the heating of high-alumina, ultra-low-cement refractory castables / M. D. M. Innocentini, F. A. Cardoso, M. M. Akyioshi [et al.] // J. Amer. Ceram. Soc. — 2003. — Vol. 86, № 7. — Р. 1146-1148.
6. Innocentini, M. D. M. Vaporization processes and pressure buildup during dewatering of dense refractory castables / M. D. M. Innocentini, M. F. S. Miranda, F. A. Cardoso [et al.] // J. Amer. Ceram. Soc. — 2003. — Vol. 86, № 9. — Р. 1500-1503.
7. . Kalpokaite-Dickuviene, R. Investigation of microfiber as component of cementitious complex binder / R. Kalpokaite-Dickuviene, K. Brinkiene, J. Cesniene // Materials science (Medziagotyra). — 2009. — Vol. 15, № 4. — P. 329-334.
8. Laukaitis, A. K. J. Influence of mechanically treated carbon fibre additives on structure formation and properties of autoclaved aerated concrete / A. K. J. Laukaitis, M. Kligys, D. Mikulskis [et al.] // Construction and building materials. — Vol. 26, Iss. 1. — Oxford : Elsevier, 2012.
9. Krasnikovs, A. Numerical 3D investigation of non-metallic (Glass,Carbon) fiber pull-out micromechanics (in ConcreteMatrix) / A. Krasnikovs, A. Khabaz, I. Telnova [et al.] // Transport and Engineering. Mechanics. — 2010. — Vol. 33. — Р. 103-108.
10. Каданцева, А. И. Углеродные волокна / А. И. Каданцева, В. А. Тверской : учебное пособие. — М. : МИТХТ им. М. В. Ломоносова (Издательско-полиграфический центр), 2008. — 55 c.
11. Peret, C. M. Steel fibers and mechanical behavior of refractory castables on drying / C. M. Peret, V. C. Pandolfelli // Amer. Ceram. Soc. Bull. — 2006. — Vol. 85, № 1. — P. 9401-9407.
Supplementary files
For citation: Boris R., Antonovich V., Spudulis E., Volochko A. THE INFLUENCE OF THE CARBON FIBER ON THE MEDIUM-CEMENT HEAT-RESISTANT CONCRETE PROPERTIES. NOVYE OGNEUPORY (NEW REFRACTORIES). 2014;(8):45-48. https://doi.org/10.17073/1683-4518-2014-8-45-48
Refbacks
- There are currently no refbacks.