.png)
.png)
Email this article 
THE RING-SHAPED POROUS REFRACTORY PURGING BLOCK DESIGNING FOR THE STEEL PURIFICATION IN TUNDISH LADLE
https://doi.org/10.17073/1683-4518-2014-6-3-8
Abstract
The ring-shaped purging block with the optimum pore size is designed to facilitate to the fullest extent the non-metallic impurities removal out of tundish's bath. The efficiency of the developed ring-shaped purging block design is confirmed by the theoretical computations, physical modeling data, and by the industrial tests. Ill. 4. Ref. 14. Tab. 1.
About the Authors
A. N. SmirnovUkraine
V. G. Efimova
Ukraine
A. V. Kravchenko
Ukraine
References
1. Tassot, P. Ways of improving steel quality in the tundish / P. Tassot, N. Reichert // Revue de metallurgie. — 2010. — № 107. — P. 179-185.
2. Zhang, L. State of the art in the control of inclusions during steel ingot casting / L. Zhang, B. Thomas // Metallurgical and Materials Transactions B. — 2006. — Vol. 37, № 5. — P. 733-761.
3. Zhang, L. Fundamentals of inclusion removal from liquid steel by bubble flotation / L. Zhang, S. Taniguchi // International Materials Reviews. — 2000. — Vol. 45, № 2. — P. 59-82.
4. Arcos-Gutierrez, H. Mathematical analysis of inclusion removal from liquid steel by gas bubbling in a casting tundish / H. Arcos-Gutierrez, J. de J. Barreto, 5. Garcia-Hernandez [et al.] // Applied Mathematics. — 2012. — № 4. — P. 1-16.
5. Смирнов, А. Н. Рафинирование стали в промежуточном ковше слябовой МНЛЗ при продувке аргоном через кольцевую пористую фурму / А. Н. Смирнов, В. Г. Ефимова, А. В. Кравченко [и др.] // Сталь. — 2013. — № 12. — С. 14-20.
6. Cwudzinski, A. Numerical simulation of liquid steel flow and behaviour of non-metallic inclusions in one-strand slab tundish with subflux turbulence controller and gas permeable barrier / A. Cwudzinski // Ironmaking and Steelmaking. — 2010. — Vol. 37, № 3. — P. 169-180.
7. Kumar, D. S. Forced flotation of inclusions in tundish / D. S. Kumar, T. Rajendra, R. Prasad [et al.] // Ironmaking and Steelmaking. — 2009. — Vol. 36, № 6. — P. 470-475.
8. Минаев, Ю. А. Физикохимия в металлургии / Ю. А. Минаев, В. В. Яковлев. — М. : МИСИС, 2001. — 320 с.
9. Смирнов, А. Н. Непрерывная разливка стали / А. Н. Смирнов, С. В. Куберский, Е. В. Штепан. — Донецк : Цифровая типография, 2011. — 482 с.
10. Rogler, J. Modeling of inclusion removal in a tundish by gas bubbling / J. Rogler. — Canada : Eng. Ryerson University, 2004. — 54 p.
11. Zhong, L. C. Fluid flow behaviour in slab continuous casting tundish with different configurations of gas bubbling curtain / L. C. Zhong, L. Y. Li, B. Wang [et al.] // Ironmaking and Steelmaking. — 2008. — Vol. 35, № 6. — P. 436-440.
12. Nguyen, A. V. On modelling of bubble-particle attachment probability in flotation / A. V. Nguyen, J. Ralston, H. J. Schulze // International Journal of Mineral Processing. — 1998. — Vol. 53, № 4. — P. 225-249.
13. Пат. 103293 Украина. Способ рафинирования металлического расплава в промежуточном ковше / Сердюков А. О., Смирнов А. Н., Кравченко А. В. и др. ; заявл. 29.04.13 ; опубл. 25.09.2013, Бюл. № 18.
14. Пат. 103294 Украина. Устройство для рафинирования металического расплава в промежуточном ковше / Сердюков А. О., Смирнов А. Н., Кравченко А. В. и др. ; заявл. 03.06.13 ; опубл. 25.09.2013, Бюл. № 18.
Supplementary files
For citation: Smirnov A.N., Efimova V.G., Kravchenko A.V. THE RING-SHAPED POROUS REFRACTORY PURGING BLOCK DESIGNING FOR THE STEEL PURIFICATION IN TUNDISH LADLE. NOVYE OGNEUPORY (NEW REFRACTORIES). 2014;(6):3-8. https://doi.org/10.17073/1683-4518-2014-6-3-8
Refbacks
- There are currently no refbacks.