.png)
.png)
Email this article 
APPLICATION OF REFRACTORY SCRAP FOR FLUX PRODUCTION
https://doi.org/10.17073/1683-4518-2015-1-14-16
Abstract
The fabrication technique for flux production is developed with the using of refractory scrap. After the preliminary grinding of both the refractory scrap and magnesium filler the pressed compacts were formed according to the medium-dry vibration molding technique. The binder was the mixture of magnesia and silicate hydraulic binders. The compacted flux was tested in course of converter operation at the metallurgical site of the Incorporated West Siberian Metallurgical Complex «EVRAZ ZSMK». The positive test certificates were obtained. Ref. 3. Tab. 2.
About the Authors
O. А. KonovalovaRussian Federation
V. Yu. Zagorodnov
Russian Federation
S. M. Karimov
Russian Federation
A. V. Amelin
Russian Federation
A. M. Koverzin
Russian Federation
References
1. Стрелов, К. К. Теоретические основы технологии огнеупорных материалов / К. К. Стрелов, И. Д. Кащеев. — М. : Металлургия, 1996. — 608 с.
2. Зборщик, А. М. Конспект лекций по дисциплине «Металлургия стали» / А. М. Зборщик. — Донецк : ГВУЗ «ДонНТУ», 2008. — 238 с.
3. Ивко, В. В. Испытание самораспадающихся магнезиальных гранул СМГ-10С для модификациитконвертерного шлака в ОАО «Днепропетровский металлургический комбинат им. Дзержинского» / В. В. Ивко, А. А. Ситало, Б. Ю. Гребенюк // Новые огнеупоры. — 2005. — № 6. — С. 43–49.
Supplementary files
For citation: Konovalova O.А., Zagorodnov V.Y., Karimov S.M., Amelin A.V., Koverzin A.M. APPLICATION OF REFRACTORY SCRAP FOR FLUX PRODUCTION. NOVYE OGNEUPORY (NEW REFRACTORIES). 2015;(1):14-16. https://doi.org/10.17073/1683-4518-2015-1-14-16
Refbacks
- There are currently no refbacks.