THERMAL ANALYSIS OF QUARTZITE USED FOR THE LINING INDUCTION CRUCIBLE FURNACE'S OF THE NORMAL-FREQUENCY

V. A. Kukartsev; A. I. Trunova; A. V. Kukartsev

doi:10.17073/1683-4518-2014-5-33-35

THERMAL ANALYSIS OF QUARTZITE USED FOR THE LINING INDUCTION CRUCIBLE FURNACE'S OF THE NORMAL-FREQUENCY

V. A. Kukartsev, A. I. Trunova, A. V. Kukartsev

https://doi.org/10.17073/1683-4518-2014-5-33-35

Full Text:

Abstract

The investigating results are given in the article for the temperature influence on quartzite's enthalpy and heat-absorption capacity changing which leads to its crystal lattice distortions. The quartzite is used in the linings of the normal-frequency induction furnaces. The changing regularities are revealed for the heat-absorption capacity and for the enthalpy taking place in course of the furnace operation. The connection is defined between these changing regularities and both phase transformations in quartzitecrystal lattice and material's properties which affect the lining resistance. Ill. 4. Ref. 3.

Keywords

quartzite, quartzite crystal lattice, lining, normal-frequency induction furnaces, enthalpy, heat-absorption capacity,

About the Authors

V. A. Kukartsev

Сибирский федеральный университет, Красноярск
Russian Federation

A. I. Trunova

Сибирский федеральный университет, Красноярск
Russian Federation

A. V. Kukartsev

Сибирский государственный аэрокосмический университет имени академика М. Ф. Решетнева, Красноярск
Russian Federation

References

1. Платонов, Б. П. Индукционные печи для плавки чугуна / Б. П. Платонов, А. Д. Акименко, С. М. Багуц-кая [и др.]. — М. : Машиностроение, 1976.— 176 с.

2. Топор, Н. Д. Термический анализ минералов и неорганических соединений / Н. Д. Топор [и др.]. — М. : МГК, 1987.

3. Кукарцев, В. А. Исследование рентгеновскими методами влияния температуры на межплоскостные расстояния кристаллической решетки перво-уральского кварцита, используемого для футеровкиндукционных печей / В. А. Кукарцев, А. К. Абкарян // Новые огнеупоры. — 2013. — № 10. — С. 44-46.

4. Kukartsev, V. A. Study by X-ray methods of the effect of temperature on crystal lattice interplanar distances of pervoural'sk quartzite used for induction furnace lining / К A. Kukartsev, A. K. Abkaryan // Refractories and Industrial Ceramics. — 2014.—Vol. 54, № 5.— P. 413-415.

Supplementary files

For citation: Kukartsev V.A., Trunova A.I., Kukartsev A.V. THERMAL ANALYSIS OF QUARTZITE USED FOR THE LINING INDUCTION CRUCIBLE FURNACE'S OF THE NORMAL-FREQUENCY. NOVYE OGNEUPORY (NEW REFRACTORIES). 2014;(5):33-35. https://doi.org/10.17073/1683-4518-2014-5-33-35

Refbacks

There are currently no refbacks.

ISSN 1683-4518 (Print)

Username
Password