THE PROTECTION OF ALUMINUM ELECTROLYZER'S GRA-PHITIZED CARBON LINING BY THE INTERCALATION LITHIUM LAYER
https://doi.org/10.17073/1683-4518-2014-3-9
Abstract
The hardening problem for the graphitized carbon linings used in the aluminum electrolyzers is discussed in the article for high-temperature condition of alumina-cryolite melts. It was established that lithium influences actively the changing of the graphite's structure layer via their in-tergrowth as a result of intercalation. The improvement of aluminum electrolyzers' graphitized carbon linings' properties is proved by the series of experimental works carried out on several carbon materials. Ill. 3. Ref. 6. Tab. 1.
About the Authors
V. Yu. BazhinRussian Federation
R. Yu. Feshchenko
Russian Federation
A. V. Saitov
Russian Federation
E. A. Kuznetsova
Russian Federation
References
1. Rapoport, M. B. Deformation of cathode blocks in aluminium baths during process of electrolysis / M.B.Rapoport, К N.Samoilenko// Tsvet Met. — 1957.— № 30. — P. 44-51.
2. Фиалков, A. C. Формирование структуры и свойств углеграфитовых материалов / A. C. Фиалков. — М. : Металлургия, 1965. — 288 с.
3. Pflugmacher, I. // Proc. 3rd Conf. on lndustrial Carbon and Graphite, 14-17 April 1970/ I. Pflugmacher, H. P. Boehm. — London: S. C. I., 1970.
4. Sorlie, M. Cathodes in aluminum electrolysis; 3rd edition / M. Sorlie, H. A. Oye. — Dusseldorf: Aluminum Verlag GmbH, 2010. — 678 р.
5. Ubbelohde, A. R. Graphite and its crystal compounds / A. R. Ubbelohde, F. A. Lewis. — Oxford University Press, 1965. — 249 p.
6. Фиалков, А. С. Углерод межслоевые соединения и композиты на его основе / А. С. Фиалков. — М.: Аспект Пресс, 1997. — 718 с.
Supplementary files
For citation: Bazhin V.Y., Feshchenko R.Y., Saitov A.V., Kuznetsova E.A. THE PROTECTION OF ALUMINUM ELECTROLYZER'S GRA-PHITIZED CARBON LINING BY THE INTERCALATION LITHIUM LAYER. NOVYE OGNEUPORY (NEW REFRACTORIES). 2014;(3):87-90. https://doi.org/10.17073/1683-4518-2014-3-9
Refbacks
- There are currently no refbacks.