Preparation of sulfated zirconia powder for grinding

R. M. Bastrikov; V. V. Kartashov

doi:10.17073/1683-4518-2025-1-47-52

Preparation of sulfated zirconia powder for grinding

R. M. Bastrikov, V. V. Kartashov

https://doi.org/10.17073/1683-4518-2025-1-47-52

Full Text:

Abstract

Powder materials based on zirconium dioxide are widely used in refractory ceramics and thermal barrier coatings. Composite powder 3 YSZ (3 mol. % Y2O3) was synthesized by hydroxides co-precipitation method from zirconium oxynitrate solution with preliminary addition of sulfate ions for reducing the grain growth rate during precipitation and increasing powder specific surface area. For removing sulfur impurity the powder of stabilized zirconium dioxide was calcined at 1050‒1200 ˚C with subsequent wet grinding. Powder calcination temperatures were selected for reducing sulfur content and performing effective grinding. Ill. 4. Ref. 20. Tab. 1.

Keywords

sulfated zirconia, sulfate ions, co-precipitation method, refractory ceramics,

About the Authors

R. M. Bastrikov

Уральский федеральный университет (УрФУ)
Russian Federation

V. V. Kartashov

Уральский федеральный университет (УрФУ)
Russian Federation

References

1. Хайбиева, В. Ш. Исследование влияния ZrO2 различной дисперсности на электроосаждение никелевых покрытий и их свойства / В. Ш. Хайбиева, Р. Е. Фомина, Р. С. Сайфуллин [и др.] // Вестник технологического университета. ― 2016. ― № 9. ― С. 129‒131.

2. Федоров, П. П. Диоксид циркония. Обзор / П. П. Федоров, Е. Г. Яроцкая // Конденсированные среды и межфазные границы. ― 2021. ― № 2. ― С. 169‒187.

3. Белоусова, Е. Б. Тенденции мирового рынка цирконового концентрата / Е. Б. Белоусова // Минеральные ресурсы России. Экономика и управление. ― 2020. ― № 6 (174). ― С. 77‒79.

4. Maletskii, A. V. Influence of stabilized zirconium dioxide and high hydrostatic pressure on the kinetics of sintering nanopowders of metastable aluminum oxide / A. V. Maletskii, G. K. Volkova, D. R. Belichko [et al.] // Ceram. Int. ― 2024. ― Vol. 50 (22). ― P. 46506‒46515.

5. Maletsky, A. V. Structure formation and properties of corundum ceramics based on metastable aluminium oxide doped with stabilized zirconium dioxide / A. V. Maletsky // Ceram. Int. ― 2021. ― Vol. 47. ― P. 19489‒19495.

6. Mednikov, A. F. Modern methods of forming thermal barrier coatings: a review / A. F. Mednikov, K. S. Medvedev, G. V. Kachalin [et al.] // Global Energy. ― 2023. ― Vol. 29 (4). ― P. 132‒148.

7. Ugas-Carrión, R. Influence of stabilizing agents on structure and protection performance of zirconium oxide films / R. Ugas-Carrión, F. Sittner, M. Yekehtaz [et al.] // Surf. Coat. Technol. ― 2010. ― Vol. 204. ― P. 2064‒2067.

8. Kurapova, O. Yu. Sensor Properties of Stabilized Zirconia Ceramics, Manufactured from Nanopowders / O. Yu. Kurapova, M. M. Pivovarov, K. V. Nikiforova [et al.] // Reviews on Advanced Materials Science. ― 2019. ― Vol. 57 (2). ― P. 257‒261.

9. Ghayoor, R. Spark plasma sintered YSZ gas electrode produced from powders synthesized by a large-scale method / R. Ghayoor, M. H. Yousefi // Mater. Chem. Phys. ― 2022. ― Vol. 289. ― Article 126467.

10. Du, L. Synthesized by coprecipitation method for controlled phase structures of 5YSZ / L. Du, J. Yang, X. Zhong [et al.] // J. Mater. Res. Technol. ― 2024. ― Vol. 29. ― P. 5473‒5483.

11. Zhuo, Y. Effect of diameter and content of zirconium dioxide on the microstructure and mechanical properties of the TC17 titanium alloy repaired by wire arc additive manufacture / Y. Zhuo, C. Yang, C. Fan [et al.] // J. Alloys Compd. ― 2022. ― Vol. 893. ― Article 162295.

12. Исмагулов, Д. Б. Исследование влияния сульфатионов на размер частиц гидратированного диоксида циркония / Д. Б. Исмагулов, М. А. Машковцев // Водородная энергетика сегодня : тез. докл. первой молодежной научной конференции. ― 2023. ― С. 49‒51.

13. Бекметова, Л. И. Синтез нанесенных сульфатциркониевых катализаторов изомеризации гексана на основе модифицированного оксида алюминия / Л. И. Бекметова, О. В. Джикия, К. В. Казанцев [и др.] // Техника и технология нефтехимического и нефтегазового производства : материалы 11-й Международной научно-технической конференции. ― 2021. ― С. 28, 29.

14. Malyi, O. I. Effect of sulfur impurity on the stability of cubic zirconia and its interfaces with metals / O. I. Malyi, Z. Chen, G. S. Gang [et al.] // J. Mater. Chem. ― 2011. ― Vol. 33. ― P. 12363‒12368.

15. Zhang, Y. A theoretical study of sulfur poisoning tolerance at the interface of Mo doped Ni/Yttriastabilized Zirconia / Y. Zhang, Y. Wang, N. Xu [et al.] // Int. J. Hydrogen Energy. ― 2021. ― Vol. 46. ― P. 21075‒21081.

16. Lazar, R. R. The influence of sulphur on the processing of zirconia based ceramics / R. R. Lazar, A. B. Menezes, V. A. Ussui [et al.] // J. Eur. Ceram. Soc. ― 2002. ― Vol. 22. ― P. 2813‒2820.

17. Lindgren, M. Impact of additives on zirconium oxidation by water: mechanistic insights from first principles / M. Lindgren, I. Panas // RSC Advances. ― 2013. ― Vol. 3, is. 44. ― P. 21613‒21619.

18. Nerubatsky, V. P. The influence of zirconium dioxide nanoadditives on the properties of mullite-corundum / V. P. Nerubatsky, E. S. Hevorkian, R. V. Vovk [et al.] // Low Temperature Physics. ― 2024. ― Vol. 50. ― P. 558‒568.

19. Zhao, C. Effects of CaCO3 and ZrO2 on microstructure and properties of silicon-bonded SiC porous ceramics / C. Zhao, C. Huang, M. Zhuo [et al.] // Mater. Chem. Phys. ― 2022. ― Vol. 290. ― Article 126605.

20. Rui, X. Preparation of monodisperse ZrO2 ceramic microspheres (>200 μm) by co-axial capillary microfluidic device assisted internal gelation process / X. Rui, Ch. Jiansong, Zh. Shijiao [et al.] // Ceram. Int. ― 2019. ― Vol. 45. ― P. 19627‒19634.

Supplementary files

For citation: Bastrikov R.M., Kartashov V.V. Preparation of sulfated zirconia powder for grinding. NOVYE OGNEUPORY (NEW REFRACTORIES). 2025;(1):47-52. https://doi.org/10.17073/1683-4518-2025-1-47-52

Refbacks

There are currently no refbacks.

ISSN 1683-4518 (Print)

Username
Password