Open Access Open Access  Restricted Access Subscription Access

Production of large-format corundum refractories of increased density using vibration molding and co-sintering technology


https://doi.org/10.17073/1683-4518-2024-9-29-35

Full Text:




Abstract

Using vibration molding and co-sintering  technology,  it was possible to obtain a corundum  refractory  material with a dense structure, the values of open porosity and average density of which are comparable with the values characteristic of fused-cast refractories. To obtain a filler for concrete mass, a comparative analysis  of  aluminous raw materials, deflocculating additives and methods of molding filler for large-format corundum refractories of increased density was carried out. Optimal parameters of the filler production technology were determined.  Ill.  8. Ref. 15. Tab. 4.


About the Authors

A. M. Poskotinova
ФГБОУ ВО «Российский химико-технологический университет имени Д. И. Менделеева»; ООО «Научно-технический центр «Бакор»
Russian Federation


B. L. Krasnyi
ООО «Научно-технический центр «Бакор»
Russian Federation


K. I. Ikonnikov
ООО «Научно-технический центр «Бакор»
Russian Federation


A. L. Galganova
ООО «Научно-технический центр «Бакор»
Russian Federation


D. I. Vershinin
ФГБОУ ВО «Российский химико-технологический университет имени Д. И. Менделеева»
Russian Federation


O. I. Rodimov
ООО «Научно-технический центр «Бакор»
Russian Federation


D. D. Bernt
ООО «Научно-технический центр «Бакор»; НИЯУ МИФИ
Russian Federation


A. S. Sizova
ООО «Научно-технический центр «Бакор»
Russian Federation


References

1. Соколов, В. А. Дуговые плавильные установки для синтеза и производства плавленолитых огнеупоров / В. А. Соколов, М. Д. Гаспарян, П. П. Мамочкин // Новые огнеупоры. ― 2009. ― № 6. ― С. 15‒18.

2. Попов, О. Н. Производство и применение плавленолитых огнеупоров / О. Н. Попов, П. Т. Рыбалкин, В. А. Соколов, С. Д. Иванов. ― М. : Металлургия, 1985. ― 256 с.

3. Еремин, Н. И. Процессы и аппараты глиноземного производства / Н. И. Еремин, А. Н. Наумчик, В. Г. Казаков. ― М. : Металлургия, 1980. ― 360 с.

4. Пилипенко, В. Н. Технология виброударноимпульсного уплотнения бетонной смеси / В. Н. Пилипенко // Вестник Донбасской национальной академии строительства и архитектуры. ― 2010. ― № 5‒2 (85). ― С. 234‒238.

5. Попильский, Р. Я. Прессование порошковых керамических масс / Р. Я. Попильский, Ю. Е. Пивинский. ― М. : Металлургия, 1983. ― 176 с.

6. Кащеев, И. Д. Химическая технология огнеупоров: уч. пособие / И. Д. Кащеев, К. К. Стрелов, П. С. Мамыкин. ― М. : Интермет Инжиниринг, 2007. ― 752 с.

7. Kockegey-Lorenz, R. The value of additives in refractory castables. Part 1. Castables without silica fume / R. Kockegey-Lorenz, A. Buhr, D. Schmidtmeier [et al.] // Technology Trends. ― 2014. ― № 6. ― P. 75‒81.

8. Demidova-Buizinene, I. Effect of amount of deflocculant on change in physicomechanical properties of medium-cement heat-resistant concretes during drying and heat treatment / I. Demidova-Buizinene, I. Pundiene // Refract. Ind. Ceram. ― 2014. ― Vol. 55, № 2. ― Р. 121‒127. https://doi.org/10.1007/s11148-014-9673-4.

9. Hommer, H. The effect of polycarboxylate ethers as deflocculants in microsilica containing castables / H. Hommer // Published in the Proceedings of the 10th Biennial Worldwide Congress on Refractories UNITECR ́07. ― 2007. ― Р. 401‒404.

10. Samant, A. Effect of deflocculants on high alumina low cement castables / departament of ceramic engineering / A. Samant. ― Rourkela: National institute of technology, 2015. ― 35 р.

11. De Oliveira, Ivon R. Setting behavior of ultra-low cement refractory castables in the presence of citrate and polymethacrylate salts / Ivon R. de Oliveira, Andre R. Studart, Federico A. Valenzuela, Victor C. Pandolfelli // J. Eur. Ceram. Soc. ― 2003. ― № 23. ― P. 2225‒2235.

12. Пат. 2782636 С1 Российская Федерация, МПК C04B 35/482, C04B 35/626. Способ получения керамического огнеупорного изделия из диоксида циркония / Красный Б. Л., Иконников К. И., Галганова А. Л. ; заявитель и патентообладатель Общество с ограниченной ответственностью «Научно-технический центр «Бакор». ― № 2021135331 ; заявл. 01.12.2021 ; опубл. 31.10.2022. ― 18 с.

13. Пат. 2782638 C1 Российская Федерация, МПК C04B 35/482, C04B 35/16, C04B 35/626. Способ получения керамического огнеупорного изделия из циркона / Красный Б. Л., Иконников К. И., Галганова А. Л. ; заявитель и патентообладатель Общество с ограниченной ответственностью «Научно-технический центр «Бакор». ― № 2021135332 ; заявл. 01.12.2021 ; опубл. 31.10.2022. ― 18 с.

14. Пат. 2782658 C1 Российская Федерация, МПК C04B 35/482, C04B 35/626. Способ получения керамического огнеупорного изделия из цирконата кальция / Красный Б. Л., Иконников К. И., Галганова А. Л. ; заявитель и патентообладатель Общество с ограниченной ответственностью «Научно-технический центр «Бакор». ― № 2021135330 ; заявл. 01.12.2021 ; опубл. 31.10.2022. ― 18 с.

15. Назаров, В. В. Коллоидная химия / В. В. Назаров, А. С. Гродский, Н. А. Шабанова [и др.] ; под ред. В. В. Назарова. ― СПб. : Лань, 2022. ― 436 с.


Supplementary files

For citation: Poskotinova A.M., Krasnyi B.L., Ikonnikov K.I., Galganova A.L., Vershinin D.I., Rodimov O.I., Bernt D.D., Sizova A.S. Production of large-format corundum refractories of increased density using vibration molding and co-sintering technology. NOVYE OGNEUPORY (NEW REFRACTORIES). 2024;(9):29-35. https://doi.org/10.17073/1683-4518-2024-9-29-35

Views: 172

Refbacks

  • There are currently no refbacks.


ISSN 1683-4518 (Print)