Open Access Open Access  Restricted Access Subscription Access

Composite sorbent with honeycomb structure for capturing platinum catalyst aerosols


https://doi.org/10.17073/1683-4518-2023-11-55-60

Full Text:




Abstract

A method for producing a composite sorbent with a honeycomb structure (a system of parallel directed permeable pores) for capturing platinum aerosols in high-temperature catalytic processes is proposed. The composite sorbent is prepared on the basis of cordierite ceramics with the addition of active calcium oxide to its composition. The calcium oxide precursor is introduced into the molding mass in the form of calcium carbonate powder, or by impregnating the matrix material with a solution of calcium nitrate. The mechanism of synthesis of a composite sorbent is investigated and its physicochemical properties are given. Pilot tests of composite sorbents in an industrial reactor have shown its resistance to technological conditions of ammonia conversion and the ability to capture platinum catalyst aerosols. Ill. 6. Ref. 10.

About the Authors

V. I. Vanchurin
ФГБОУ ВО «Российский химико-технологический университет имени Д. И. Менделеева»
Russian Federation


A. V. Belyakov
ФГБОУ ВО «Российский химико-технологический университет имени Д. И. Менделеева»
Russian Federation


A. Yu. Petrov
ФГБОУ ВО «Российский химико-технологический университет имени Д. И. Менделеева»
Russian Federation


References

1. Янин, Е. П. Платиновые металлы в окружающей среде (распространенность, источники, техногенное загрязнение, рециклинг) / Е. П. Янин // Научные и технические аспекты охраны окружающей среды. ― 2008. ― № 5. ― С. 2‒94.

2. Brushtein, E. A. Industrial monitoring of platinoid losses during the oxidation of ammonia in UKL-7 reactors / E. A. Brushtein, V. I. Vanchurin, A. V. Yashchenko // Catalysis in Industry. ― 2014. ― Vol. 8, № 3. ― P. 239‒245.

3. Гущин, Г. М. Сетки и каталитические системы из сплавов на основе платины и палладия для азотной промышленности / Г. М. Гущин, В. П. Черемных, М. Н. Сивков // Материалы 1-й международной конференции «Производство оборудования из благородных металлов и его применение в химической и силикатной промышленности», Берлин, 2005 г. ― М. : Типография ООО «Гарт», 2005. ― С. 85‒98.

4. Yang, Z. Reorganization of structure of catching grids on the basis of a palladium / Z. Yang, Н. Zhao // Platinum Metals Rev. ― 1995. ― № 1. ― Р. 19‒26.

5. Тимофеев, Н. И. Расширение использования палладия в каталитических процессах окисления аммиака при производстве азотной кислоты / Н. И. Тимофеев, Г. Д. Гущин, А. В. Ермаков // Драгоценные металлы. Драгоценные камни. ― 2002. ― № 12. ― С. 52‒55.

6. Дейнека, Д. Н. Исследования и технологии. Адсорбент улавливания платиновых металлов в производстве азотной кислоты / Д. Н. Дейнека, П. А. Козуб, С. Н. Козуб. ― Саарбрюккен : Lambert Academic Publishing, 2015. ― 156 с.

7. Чернышев, В. И. Оптимизация газодинамической обстановки и пакета платиноидных сеток в реакторе конверсии аммиака / В. И. Чернышев // Катализ в промышленности. ― 2008. ― № 3. ― С. 17‒26.

8. Бруштейн, Е. А. Перспективы развития двухступенчатых каталитических систем для окисления аммиака в производстве азотной кислоты / Е. А. Бруштейн, В. И. Ванчурин, А. В. Ященко // Катализ в промышленности. ― 2012. ― № 6. ― С. 47‒52.

9. Vanchurin, V. I. Silica material as a support for a catalyst with a fixed nanostructured active component / V. I. Vanchurin, A. V. Belyakov, O. Yu. Salnikova, A. Yu. Petrov // Refract. Ind. Ceram. ― 2022. ― Vol. 63, № 2. ― P. 150−155.

10. Vanchurin, V. I. Technology of cordierite ceramics for the production of catalysts / V. I. Vanchurin, A. V. Fedotov, A. V. Belyakov, A. Yu. Petrov // Refract. Ind. Ceram. ― 2019. ― Vol. 60, № 4. ― Р. 399‒404.


Supplementary files

For citation: Vanchurin V.I., Belyakov A.V., Petrov A.Y. Composite sorbent with honeycomb structure for capturing platinum catalyst aerosols. NOVYE OGNEUPORY (NEW REFRACTORIES). 2023;(11):55-60. https://doi.org/10.17073/1683-4518-2023-11-55-60

Views: 66

Refbacks

  • There are currently no refbacks.


ISSN 1683-4518 (Print)