

Electrodeposition of nickel-based composite electrochemical coatings using bulk-reinforced Al‒TiB2 powders
https://doi.org/10.17073/1683-4518-2023-8-54-59
Abstract
About the Authors
F. V. KrasikovRussian Federation
St. Petersburg
M. A. Markov
Russian Federation
St. Petersburg
M. V. Staritsyn
Russian Federation
St. Petersburg.
M. L. Fedoseev
Russian Federation
St. Petersburg.
D. A. Tkachev
Russian Federation
Tomsk.
A. D. Bykova
Russian Federation
St. Petersburg.
References
1. Pinate, S. Electrocodeposition of Ni composites and surface treatment of SiC nano-particles / S. Pinate, A. Ispas, P. Leisner, C. Zanella // Surface & Coatings Technology. ― 2021. ― Vol. 406. ― Article № 126663. DOI: 10.1016/j.surfcoat.2020.126663.
2. Foster, J. The effect of current density and agitation on the formation of electrodeposited composite coatings / J. Foster, B. Cameron // Transactions of the IMF. ― 1976. ― Vol. 54, № 1. ― P. 178‒183.
3. Hefnawy, A. Ni‒TiN and Ni‒Co‒TiN composite coatings for corrosion protection: fabrication and electrochemical characterization / A. Hefnawy, N. Elkhoshkhany, A. Essam // J. Alloys Compds. ― 2018. ― Vol. 735. ― P. 600‒606. DOI: 10.1016/j.jallcom.2017.11.169.
4. Sangeetha, S. Tribological and electrochemical corrosion behavior of Ni‒W/BN (hexagonal) nanocomposite coatings / S. Sangeetha, G. Paruthimal Kalaignan // Ceram. Int. ― 2015. ― Vol. 45, № 9. ― P. 10415‒10424. DOI: 10.1016/j.ceramint.2015.04.089.
5. Popczyk, M. The influence of current density of electrodeposition on the electrochemical properties of Ni‒Mo alloy coatings / М. Popczyk, В. Łosiewicz // Solid State Phenom. ― 2015. ― Vol. 228. ― P. 269‒272. DOI: 10.4028/www.scientific.net/SSP.228.269.
6. Юдина, Е. М. К выбору параметров технологического процесса восстановления золотников гидрораспределителя / Е. М. Юдина, М. Р. Кадыров // Известия великолукской ГСХА. ― 2016. ― № 1. ― С. 26‒32.
7. Мухин, В. А. Получение композиционного покрытия медь–диоксид титана на алюминии / В. А. Мухин, Т. В. Антонова, М. В. Мухина, В. В. Князева // Вестник Омского ун-та. ― 2009. ― № 4. ― С. 120‒124.
8. Protsenko, V. S. Electrodeposition of Fe and composite Fe/ZrO2 coatings from a methanesulfonate bath / V. S. Protsenko, E. A. Vasil'eva, I. V. Smenova [et al.] // Surface Engineering and Applied Electrochemistry. ― 2015. ― Vol. 51, № 1. ― P. 66‒75. DOI: 10.3103/S1068375515010123.
9. Adabi, M. Effect of electrodeposition conditions on properties of Ni‒Al composite coatings / M. Adabi, A. Amadeh // Surface Engineering. ― 2015. ― Vol. 31, № 9. ― P. 650‒658. DOI: 10.1179/1743294414Y.0000000449.
10. Ghanbari, S. Corrosion resistance of electrodeposited Ni‒Al composite coatings on the aluminum substrate / S. Ghanbari, F. Mahboubi // Materials and Design. ― 2011. ― Vol. 32. ― P. 1859‒1864. DOI: 10.1016/j.matdes.2010.12.020.
11. Cai, F. Influences of Al particles on the microstructure and property of electrodeposited Ni‒Al composite coatings / F. Cai, Ch. Jiang // Applied Surface Science. ― 2014. ― Vol. 292. ― P. 620‒625. DOI: 10.1016/j.apsusc.2013.12.021.
12. Krasikov, A. V. Tungsten-rich Ni‒W coatings, electrodeposited from concentrated electrolyte for complex geometry parts protection / A. V. Krasikov, M. V. Merkulova, M. A. Markov [et al.] // Journal of Physics: Conference Series. ― 2021. ― Vol. 1758 (1). ― Article № 012019. DOI: 10.1088/1742-6596/1758/1/012019.
13. Krasikov, A. V. Electrochemical synthesis of amorphous layers from a nonequilibrium Co‒W alloy as a precursor for nanocomposite coating formation / A. V. Krasikov, A. G. Kastsova, M. A. Markov [et al.] // Russian Metallurgy (Metally). ― 2022. ― № 6. ― P. 666‒673. DOI: 10.1134/S0036029522060143.
14. Krasikov, A. V. Influence of vibration parameters during electrodeposition of Ni‒SiC composite coatings from a vibration stabilized suspension / A. V. Krasikov, M. A. Markov, V. L. Krasikov [et al.] // Journal of Machinery Manufacture and Reliability. ― 2022. ― Vol. 51, № 4. ― P. 300‒305. DOI: 10.3103/S1052618822040100.
15. Krasikov, A. V. Electrodeposition of a Ni‒SiC composite coating from a vibration-stabilized electrolyte–suspension / A. V. Krasikov, D. V. Agafonov, M. A. Markov [et al.] // Russian Metallurgy (Metally). ― 2023. ― № 6. ― P. 796-–802. DOI: 10.1134/S0036029523060241.
16. Krasikov, A. V. Influence of vibration parameters on the composition of an electrochemical nickel-submicron silicon carbide composite coating / A. V. Krasikov, V. L. Krasikov, M. A. Markov [et al.] // Russian Metallurgy (Metally). ― 2023. ― № 6. ― P. 803‒808. DOI: 10.1134/S0036029523060253.
17. Huang, Ch. A. Effect of fabrication parameters on grinding performances of electroplated Ni‒B-diamond tools with D150-diamond particles / Ch. A. Huang, Ch. H. Shen, P. Y. Li, P. L. Lai // Journal of manufacturing Processes. ― 2022. ― Vol. 80. ― P. 374‒381. DOI: 10.1016/j.jmapro.2022.05.055.
18. Huang, Ch. A. Fabrication and evaluation of electroplated Ni-diamond and Ni‒B-diamond milling tools with a high density of diamond particles / Ch. A. Huang, Sh. W. Yang, Ch. H. Shen [et al.] // The International Journal of Advanced Manufacturing Technology. ― 2019. ― Vol. 104. ― P. 2981‒2989. DOI: 10.1007/s00170-019-04174-3.
19. Liu, H. Electrodeposited Ni‒Al composite coatings with high Al content by sediment co-deposition / H. Liu, W. Chen // Surface & Coatings Technology. ― 2005. ― Vol. 191. ― P. 341‒350. DOI: 10.1016/S0257-8972(04)00184-7
Supplementary files
For citation: Krasikov F.V., Markov M.A., Staritsyn M.V., Fedoseev M.L., Tkachev D.A., Bykova A.D. Electrodeposition of nickel-based composite electrochemical coatings using bulk-reinforced Al‒TiB2 powders. NOVYE OGNEUPORY (NEW REFRACTORIES). 2023;(8):54-59. https://doi.org/10.17073/1683-4518-2023-8-54-59
Refbacks
- There are currently no refbacks.