Features of manufacturing high-heat-resistant ceramics using aluminum hafnium binder

M. S. Varfolomeev; A. S. Pokhorenko; G. I. Shcherbakova

doi:10.17073/1683-4518-2023-10-22-26

Features of manufacturing high-heat-resistant ceramics using aluminum hafnium binder

M. S. Varfolomeev, A. S. Pokhorenko, G. I. Shcherbakova

https://doi.org/10.17073/1683-4518-2023-10-22-26

Full Text:

Abstract

Keywords

керамические изделия, алюмогафниевое связующее, плавленый корунд, огнеупорная композиция,

About the Authors

M. S. Varfolomeev

ФГБОУ ВО «Московский авиационный институт (национальный исследовательский университет)»
Russian Federation

A. S. Pokhorenko

ГНЦ РФ АО «ГНИИХТЭОС»
Russian Federation

G. I. Shcherbakova

ГНЦ РФ АО «ГНИИХТЭОС»
Russian Federation

References

1. Kanyo, J. E. An overview of ceramic molds for investment casting of nickel superalloys / J. E. Kanyo, S. Schaﬀöner, R. S. Uwanyuze [et al.] // J. Eur. Ceram. Soc. ― 2020. ― Vol. 40, № 15. ― P. 4955‒4973. https://doi.org/10.1016/j.jeurceramsoc.2020.07.013.

2. Kumar, S. Characterization and properties of ceramic shells in investment casting process / S. Kumar, D. B. Karunakar // Inter. Metalcast. ― 2021. ― Vol. 15. ― P. 98‒107. https://doi.org/10.1007/s40962-020-00421-6.

3. Varfolomeev, M. S. Refractory compositions designed for highly heat-resistant ceramic molds in foundry practice / M. S. Varfolomeev, G. I. Shcherbakova // Refract. Ind. Ceram. ― 2018. ― Vol. 59, № 3. ― P. 290‒295. https://doi.org/10.1007/s11148-018-0223-3. [Варфоломеев, М. С. Разработка огнеупорных композиций для изготовления высокотермостойких керамических изделий в литейном производстве / М. С. Варфоломеев, Г. И. Щербакова // Новые огнеупоры. ― 2018. ― № 6. ― С. 18‒23]. https://doi.org/10.17073/1683-4518-2018-6-18-23.

4. Chen, X. Y. Investigations on interface reactions and wettability between melt superalloys and ceramic materials / X. Y. Chen, F. Li, J. Wang [et al.] // Key Engineering Materials. ― 2016. ― Vol. 703. ― P. 132‒137. https://doi.org/10.4028/www.scientiﬁc.net/ KEM.703.132.

5. Yao, J. S. Interaction between two Ni-Base alloys and ceramic moulds / J. S. Yao, D. Z. Tang, X. G. Liu [et al.] // Materials Science Forum. ― 2013. ― Vol. 747. ― P. 765‒771. https://doi.org/10.4028/www.scientiﬁc.net/ MSF.747-748.765.

6. Wang, H. Wettability and interfacial reactions of a low Hf-containing nickel-based superalloy on Al2O3-based, SiO2-based, ZrSiO4, and CoAl2O4 substrates / H. Wang, J. Yang, J. Meng [et al.] // Ceram. Int. ― 2020. ― Vol. 46, № 14. ― P. 22057‒22066. https://doi.org/10.1016/j.ceramint.2020.05.212.

7. Chen, X. Y. Research status of the interface reactions between superalloys and ceramic materials in investment casting / X. Y. Chen, L. Xiao, J. B. Yu [et al.] // Special Casting and Nonferrous Alloys. ― 2016. ― Vol. 36, № 8. ― P. 844‒848. https://doi.org/10.15980/j.tzzz.2016.08.018.

8. Li, Q. Eﬀect of Cr, Hf and temperature on interface reaction between nickel melt and silicon oxide core / Q. Li, J. X. Song, D. G. Wang [et al.] // Rare Metals. ― 2011. ― Vol. 30. ― P. 405‒409. https://doi.org/10.1007/s12598-011-0313-6.

9. Zheng, L. Investigation of interfacial reaction between high Cr content cast nickel based superalloy K4648 and ceramic cores / L. Zheng, C. B. Xiao, G. Q. Zhang [et al.] // J. Aero Mater. ― 2012. ― Vol. 32, № 3. ― P. 10‒22. https://doi.org/10.3969/j.issn.1005-5053.2012.3.003.

10. Li, F. Modiﬁcation of ceramic shell facecoat for inhibition of sand burning defect on DZ22B directionally solidiﬁed blades / F. Li, X. Chen, Y. Zhao [et al.] // The Int. J. of Adv. Man. Tech., ― 2018. ― Vol. 99. ― P. 1771‒1780. https://doi.org/10.1007/s00170-018-2616-3.

11. Venkat, Y. Eﬀect of ﬁne alumina in improving refractoriness of ceramic shell moulds used for aeronautical grade Ni-base superalloy castings / Y. Venkat, S. Singh, D. K. Das [et al.] // Ceram. Int. ― 2018. ― Vol. 44, № 11. ― P. 12030‒12035. https://doi.org/10.1016/j.ceramint.2018.03.197.

12. Xu, Z. Microstructure evolution and mechanical behaviors of alumina-based ceramic shell for directional solidiﬁcation of turbine blades / Z. Xu, J. Zhong, X. Su [et al.] // J. of Materials Res. and Tech. ― 2019. ― Vol. 8, № 1. ― P. 876‒886. https://doi.org/10.1016/j.jmrt.2018.05.023.

13. Baranova, T. F. Experience of using silica-free alumox binder in technology for preparing composite ceramic investment casting molds for superalloy directional solidiﬁcation / T. F. Baranova, S. A. Valiakhmetov, G. V. Gogolev [et al.] // Refract. Ind. Ceram. ― 2016. ― Vol. 57, № 4. ― P. 335‒341. https://doi.org/10.1007/s11148-016-9981-y. [Баранова, Т. Ф. Опыт использования бескремнеземного связующего АЛЮМОКС в технологии изготовления комбинированных керамических форм по выплавляемым моделям для литья жаропрочных сплавов направленной кристаллизацией / Т. Ф. Баранова, С. А. Валиахметов, Г. В. Гоголев [и др.] // Новые огнеупоры. ― 2016. ― № 8. ― С. 3‒9]. https://doi.org/10.17073/1683-4518-2016-8-3-9.

14. Shcherbakova, G. I. Metallocarbosilanes and elementoxanealuminoxanes as precursors of components of nanostructured ceramic composites / G. I. Shcherbakova, P. A. Storozhenko, D. V. Zhigalov // Russian Chemical Bulletin. ― 2020. ― Vol. 69. ― P. 875‒884. https://doi.org/10.1007/s11172-020-2844-1. [Щербакова, Г. И. Металлокарбосиланы и элементоксаналюмоксаны ― прекурсоры компонентов наноструктурных керамокомпозитов / Г. И. Щербакова, П. А. Стороженко, Д. В. Жигалов // Изв. Академии наук. Серия химическая. ― 2020. ― Т. 69, № 5. ― С. 875‒884.] https://doi.org/10.1007/s11172-020-2844-1

Supplementary files

For citation: Varfolomeev M.S., Pokhorenko A.S., Shcherbakova G.I. Features of manufacturing high-heat-resistant ceramics using aluminum hafnium binder. NOVYE OGNEUPORY (NEW REFRACTORIES). 2023;(10):22-26. https://doi.org/10.17073/1683-4518-2023-10-22-26

Refbacks

There are currently no refbacks.

ISSN 1683-4518 (Print)

Username
Password