.png)
.png)
Email this article 
Open Access
Subscription Access
Effect of calcium aluminate-based additive on properties of periclase-carbon refractories for steelteeming ladles
https://doi.org/10.17073/1683-4518-2023-8-38-43
Abstract
Premature decommissioning of steel-teeming ladle lining due to critical localized damage, whichi significantly reduces the functional properties of the lining, is one of the most acute problems in modern metallurgy. The main type of products used for steel-teeming ladle lining is periclase-carbon. In order to improve corrosion resistance and resistance to thermomechanical loads, additional additives, such as spinel, and high alumina CMA cement, are introduced into the periclase-carbon products. In this paper, the effect of calcium aluminate-based additive on the properties of periclasecarbon refractories is investigated. It is assumed that there is a potential for the formation of magnesium aluminate spinel (MA) in periclase-carbon products with calcium-aluminate additives during heat treatment. Fused periclase was used as the raw material, the carbon component was represented by natural flake graphite in an amount of 10 wt% and a combined binder. An additive based on calcium aluminates was introduced, with a fractional size from 0 to 3 mm, while the amount of main fractions of fused periclase was reduced by the corresponding amount of the additive introduced. The compressive strength, apparent porosity, and bending strength values before and after coking firing were analyzed. The thermal coefficient of linear expansion, phase composition and microstructure of the products were also investigated.
References
1. Стариков, В. С. Огнеупоры и футеровки в ковшевой металлургии : уч. пособие для вузов / В. С. Стариков, М. В. Темлянцев, В. В. Стариков. ― М. : МИСиС, 2003. ― 328 с.
2. Кащеев, И. Д. Оксидноуглеродистые огнеупоры / И. Д. Кащеев. ― М. : Интермет Инжиниринг, 2000. ― 265 с.
3. Dai, Y. Corrosion mechanism and protection of BOF refractory for high silicon hot metal steelmaking process / Y. Dai, J. Li, W. Yan, C. Shi // Journal of Materials Research and Technology. ― 2020. ― Vol. 9. ― P. 4292‒4308. DOI: 10.1016/j.jmrt.2020.02.055.
4. Chen, J. Corrosion and penetration behaviors of slag/ steel on the corroded interfaces of Al2O3‒C refractories: role of Ti3AlC2 / J. Chen, L. Chen, Y. Wei, N. Li, S. Zhang // Corrosion Science. ― 2018. ― Vol. 143. ― P. 166‒176. DOI: 10.1016/j.corsci.2018.08.022.
5. Fruhstorfer, J. Erosion and corrosion of alumina refractory by ingot casting steels / J. Fruhstorfer, L. Schöttler, S. Dudczig [et al.] // J. Eur. Ceram. Soc. ― 2016. ― Vol. 36. ― P. 1299‒1306. D10.1016/j.jeurceramsoc.2015.11.038.
6. Zhang, L. Measurement of erosion state and refractory lining thickness of blast furnace hearth by using threedimensional laser scanning method / L. Zhang, J. Zhang, K. Jiao [et al.] // Metallurgical Research and Technology. ― 2021. ― Vol. 118. ― Article 106. DOI: 10.1051/metal/2020085.
7. Madej, D. Detailed studies on microstructural evolution during the high temperature corrosion of SiC-containing andalusite refractories in the cement kiln preheater / D. Madej, J. Szczerba // Ceram. Int. ― 2017. ― Vol. 43. ― P. 1988‒1996. DOI: 10.1016/j.ceramint.2016.10.166.
8. Schacht, C. А. Refractory linings: thermomechanical design and applications / C. А. Schacht. ― CRC Press: Boca Raton, Florida, USA, 2019. ― 504 p. DOI: 10.1201/9780203741078.
9. Kashcheev, I. D. Study of thermal shock resistance of pulsed high-temperature equipment refractories / I. D. Kashcheev, K. G. Zemlyanoi, R. V. Dzerzhinskii, A. V. Fedotov // Refract. Ind. Ceram. ― 2016. ― Vol. 57, № 4. ― Р. 369‒372. Кащеев, И. Д. Исследование термостойкости огнеупоров для импульсных высокотемпературных установок / И. Д. Кащеев, К. Г. Земляной, Р. В. Дзержинский, А. В. Федотов // Новые Огнеупоры. ― 2016. ― № 7. ― С. 43‒47. DOI: 10.17073/1683-4518-2016-7-43-47.
10. Kondrukevich, A. A. Effect of operational factors on steel-teeming ladle lining working layer life / A. A Kondrukevich, D. V. Ryabyi // Refract. Ind. Ceram. ― 2017. ― Vol. 58. № 5. ― Р. 469‒474. Кондрукевич, А. А. Влияние эксплуатационных факторов на стойкость рабочего слоя футеровки сталеразливочных ковшей / А. А. Кондрукевич, Д. В. Рябый // Новые огнеупоры. ― 2017. ― № 9. ― С. 3‒9. DOI: 10.17073/1683-4518-2017-9-3-9.
11. Samadi, S. Thermomechanical finite element modeling of steel ladle containing alumina spinel refractory lining / S. Samadi, S. Jin, D. Gruber, H. Harmuth // Finite Elements in Analysis and Design. ― 2022. ― Vol. 206. ― Article 103762. DOI: 10.1016/j.finel.2022.103762.
12. Oliveira, R. L. G. Thermomechanical behaviour of refractory dry-stacked masonry walls under uniaxial compression / R. L. G. Oliveira, J. P. C. Rodrigues, J. M. Pereira [et al.] // Engineering Structures. ― 2021. ― Vol. 240. ― Article 112361. DOI: 10.1016/j.engstruct.2021.112361.
13. Bareiro, W. G. Numerical modelling of the thermomechanical behaviour of refractory concrete lining / W. G. Bareiro, E. D. Sotelino, F. de Andrade Silva // Magazine of Concrete Research. ― 2021. ― Vol. 73. ― P. 1048‒1059. DOI: 10.1680/jmacr.19.00371.
14. Gehre, P. Functional spinel-binder based additives for improved MgO‒C performance in ladle applications / P. Gehre, Chr. Wohrmeyer, Chr. G. Aneziris, Chr. Parr // Refractories Worldforum. ― 2017. ― Vol. 9, № 3. ― Р. 83‒88.
15. Wöhrmeyer, Chr. Protection mechanism of CMAadditives in MgO‒C ladle bricks / Chr. Wöhrmeyer, S. Gao, S. Graddick, Chr. Parr, F. Simonin // Proc 61th Int. Colloquium on Refractories, Aachen. ― 2018. ― Р. 54‒59.
16. Wöhrmeyer, Chr. Corrosion mechanism of MgO‒ CMA‒C ladle brick with high service life / Chr. Wöhrmeyer, S. Gao, Zh. Ping [et al.] / Steel Research international. ― 2020. ― Vol 91, issue 2. ― Article 1900436. https://doi.org/10.1002/srin.201900436.
17. Gao, Jianying. Role of calcium magnesium aluminate in carbon-containing bricks for steel ladle / Jianying Gao, Chr. Wohrmeyer, C. Deteuf / China's Refractorie. ― 2021. ― Vol. 30, № 1. ― Р. 23‒31
Supplementary files
For citation: Migashkin A.O. Effect of calcium aluminate-based additive on properties of periclase-carbon refractories for steelteeming ladles. NOVYE OGNEUPORY (NEW REFRACTORIES). 2023;(8):38-43. https://doi.org/10.17073/1683-4518-2023-8-38-43
Refbacks
- There are currently no refbacks.