.png)
.png)
Email this article 
Open Access
Subscription Access
The effect of the addition of nanoscale SiO2 on the physical and mechanical characteristics and durability of an industrial batch of refractory products
https://doi.org/10.17073/1683-4518-2022-9-44-48
Abstract
The physicomechanical properties and structure of mullitecorundum unformed refractories were investigated and tests of a pilot batch of refractory products for various purposes were carried out. The effect of the addition of nanoscale SiO2 (1 wt. %) on strength, structural (density, porosity) and operational characteristics of unformed refractories. The results show that this additive contributes to the formation of a structure with high apparent density and compressive strength (2,93 and 2,98 g/cm3, 87,3 and 162,1 MPa, respectively, for two types of refractories), reduces open porosity from 20 to 14 %, and also increases the resistance of refractory products (by the duration of their operation) by 25‒35 % compared to the resistance of the base refractory. The use of SiO2 nanoparticle additives reduces the consumption of refractory products and raw materials for their production, and also increases the profitability of production. Ill. 2. Ref. 19. Tab. 4.
About the Authors
D. S. SuvorovRussian Federation
B. B. Khaidarov
Russian Federation
D. V. Lysov
Russian Federation
T. B. Khaidarov
Russian Federation
D. V. Kuznetsov
Russian Federation
References
1. Tomšů, F. Refractory monolithics versus shaped refractory products / F. Tomšů, S. Palčo // Interceram. ― 2017. ― Vol. 66, № 1. ― P. 20‒23.
2. Ouedraogo, E. Refractory concretes uniaxial compression behaviour under high temperature testing conditions / E. Ouedraogo, M. Roosefid, N. Prompt // J. Eur. Ceram. Soc. ― 2011. ― Vol. 31, № 15. ― P. 2763‒2774.
3. Sarkar, R. Binders for refractory castables: an overview / R. Sarkar // Intercera ― Int. Ceram. Rev. ― 2020. ― Vol. 69, № 4. ― P. 44‒53.
4. Кащеев, И. Д. Химическая технология огнеупоров / И. Д. Кащеев, К. К. Стрелов, П. С. Мамыкин ― М. : Интермет Инжиниринг, 2007. ― 752 с.
5. Кащеев, И. Д. Свойства и применение огнеупоров: справ. изд. / И. Д. Кащеев, К. К. Стрелов. ― М. : Теплотехник, 2004. ― 352 с.
6. Xu, L. An accurate correlation between hightemperature performance and cement content of the high-alumina refractory castables / L. Xu, Y. Liu, M. Chen // Ceram. Int. ― 2022. ― Vol. 48, № 15. ― P. 22601‒22607.
7. Zhou, N. New castables and their role in advancements in monolithic refractories / N. Zhou // Interceram. ― 2006. ― Vol. 55, № 1. ― P. 24‒26.
8. Hossain, S. Development of waste derived nanolakargiite bonded high alumina refractory castable for high temperature applications / S. Hossain, P. Roy // Ceram. Int. ― 2019. ― Vol. 45, № 13. ― P. 16202‒16213.
9. Lee, W. Castable refractory concretes / W. Lee, W. Vieira, S. Zhang // Int. Mater. Rev. ― 2001. ― Vol. 46, № 3. ― P. 145‒167.
10. Suvorov, D. Nanomodification of refractories with finely-dispersed additives with the use of a vortex electromagnetic homogenizer / D. Suvorov, B. Khaydarov, D. Lysov // IOP Conference Series: Mater. Sci. Eng. ― 2020. ― Vol. 718.
11. Suvorov, D. Synthesis and research of aluminum oxide additives for refractory composite materials / D. Suvorov, A. Yudin, B. Khaydarov [et al.] // Refract. Ind. Ceram. ― 2022. ― Vol. 62, №. 5. ― P. 535‒540. Суворов, Д. С. Синтез и исследование добавки оксида алюминия для огнеупорных композиционных материалов / Д. С. Суворов, А. Г. Юдин, Б. Б. Хайдаров [и др.] // Новые огнеупоры. ― 2021. ― № 9. ― С. 35‒40.
12. Son, H. Effect of nano-silica on hydration and conversion of calcium aluminate cement / H. Son, S. Park, J. Jang // Construction and Building Materials. ― 2018. ― Vol. 169. ― P. 819‒825.
13. Roy, J. Nanotechnology in castable refractory / J. Roy, S. Chandra, S. Maitra // Ceram. Int. ― 2019. ― Vol. 45.
14. Otroj, S. The effect of nano-size additives on the electrical conductivity of matrix suspension and properties of self-flowing low-cement high alumina refractory castables / S. Otroj, A. Sagaeian, A. Daghighi // Ceram. Int. ― 2010. ― Vol. 36. ― P. 1411‒1416.
15. Chen, J. The effect of nano-γ-Al2O3 additive on early hydration of calcium aluminate cement / J. Chen, C. Liang, B. Li, E. Wang // Construction and Building Materials. ― 2018. ― Vol. 158. ― P. 755‒760.
16. Mohammadi, H. Effect of nanosilica addition on bioactivity and in vivo properties of calcium aluminate cement / H. Mohammadi, M. Nilforoushan, M. Tayebi // Ceram. Int. ― 2020. ― Vol. 46, № 4. ― P. 4335‒4343.
17. Guo, C. Characterization and mechanism of early hydration of calcium aluminate cement with anatase-TiO2 nanospheres additive / C. Guo, E. Wang, X. Hou [et al.] // Construction and Building Materials. ― 2020. ― Vol. 261. ― Article № 119922.
18. Pinto, V. Binder effect on ZnAl2O4-containing highalumina refractory castables / V. Pinto, A. Luz, O. Borges // Ceram. Int. ― 2022. ― Vol. 48, № 8. ― P. 11401‒11409.
19. Quanli, J. Effect of microsilica addition on the properties of colloidal silica bonded bauxite-andalusite based castables / J. Quanlia, Z. Jub, Z. Ying // Ceram. Int. ― 2018. ― Vol. 44, № 3. ― P. 3064‒3068.
Supplementary files
For citation: Suvorov D.S., Khaidarov B.B., Lysov D.V., Khaidarov T.B., Kuznetsov D.V. The effect of the addition of nanoscale SiO2 on the physical and mechanical characteristics and durability of an industrial batch of refractory products. NOVYE OGNEUPORY (NEW REFRACTORIES). 2022;(9):44-48. https://doi.org/10.17073/1683-4518-2022-9-44-48
Refbacks
- There are currently no refbacks.