1. Kuzin, Valery V. A new generation of ceramic tools / Valery V. Kuzin, Sergey N. Grigor’ev, David R. Burton [et al.] // Proceedings of the 10th International Conference on Manufacturing Research ICMR 2012. ― 2012. ― Р. 523‒528.
2. Bocanegra-Bernal, M. H. Dense and near-net-shape fabrication of Si3N4 ceramics / M. H. Bocanegra-Bernal, B. Matovic // Mater. Sci. Eng.: A. ― 2009. ― Vol. 500, № 1/2. ― Р. 130‒149.
3. Duan, Yusen. Cost effective preparation of Si3N4 ceramics with improved thermal conductivity and mechanical properties / Yusen Duan, Ning Liu, Jingxian Zhang, Hui Zhang [et al.] // J. Eur. Ceram. Soc. ― 2020. ― Vol. 40, № 4. ― Р. 298‒304.
4. Santos, C. Compressive creep behavior of hot-pressed Si3N4 ceramics using alumina and a rare earth solid solution as additives / C. Santos, K. Strecker, M. J. R. Barboza [et al.] // International Journal of Refractory Metals and Hard Materials. ― 2005. ― Vol. 23, № 3. ― Р. 183‒192.
5. Zhu, Xinwen. Effects of processing method and additive composition on microstructure and thermal conductivity of Si3N4 ceramics / Xinwen Zhu, You Zhou, Kiyosh Hirao // J. Eur. Ceram. Soc. ― 2006. ― Vol. 26, № 4/5. ― Р. 711‒718.
6. Tian, Chunyan. Thermal shock behavior of Si3N4‒ TiN nanocomposites / Chunyan Tian, Hai Jiang, Ning Liu // International Journal of Refractory Metals and Hard Materials. ― 2011. ― Vol. 29, № 1. ― Р. 14‒20.
7. Miyazaki, Hiroyuki. Correlation of wear behavior and indentation fracture resistance in silicon nitride ceramics hot-pressed with alumina and yttria // Hiroyuki Miyazaki, Hideki Hyuga, Yu-ichi Yoshizawa [et al.] / J. Eur. Ceram. Soc. ― 2009. ― Vol. 29, № 8. ― Р. 1535‒1542.
8. Liu, Xue-Jian. Microstructure and mechanical properties of silicon nitride ceramics prepared by pressureless sintering with MgO-Al2O3-SiO2 as sintering additive / Xue-Jian Liu, Zhi-Yong Huang, Qi-Ming Ge [et al.] // J. Eur. Ceram. Soc. ― 2005. ― Vol. 25, № 14. ― Р. 3353‒3359.
9. Calis Acikbas, N. Influence of β-Si3N4 particle size and heat treatment on microstructural evolution of α : β-SiAlON ceramics / N. Calis Acikbas, R. Kumar, F. Kara [et al.] // J. Eur. Ceram. Soc. ― 2011. ― Vol. 31, № 3. ― Р. 629‒635.
10. Hampshire, Stuart. Silicon nitride‒silicon carbide micro/nano‐composites ― a review / Stuart Hampshire, Tríona Kennedy // Int. J. Appl. Ceram. Technol. ― 2021. ― Vol. 19, № 2. ― Р. 1107‒1125.
11. Balog, М. Nano/macro-hardness and fracture resistance of Si3N4/SiC composites with up to 13 wt. % of SiC nano-particles / M. Balog, J. Kečkéš, T. Schöberl [et al.] // J. Eur. Ceram. Soc. ― 2006. ― Vol. 27, № 5. ― Р. 2145‒2152.
12. Yongming, Luo. In situ preparation of Si3N4‒TiN composite by pyrolysis of polytitanosilazane (PTSZ) / Luo Yongming, Zheng Zhimin, Xu Caihong, Mei Xuening // Ceram. Int. ― 2009. ― Vol. 35, № 3. ― Р. 1301‒1303.
13. Maros, B. Maria. Tribological characterisation of silicon nitride/multilayer graphene nanocomposites produced by HIP and SPS technology / Maria B. Maros, Alexandra K. Németh, Zoltán Károly [et al.] // Tribology International. ― 2016. ― Vol. 93, Part A. ― Р. 269‒281.
14. Кузин, В. В. Взаимосвязь режимов алмазного шлифования с состоянием поверхности Si3N4- керамики / В. В. Кузин, С. Ю. Фёдоров, С. Н. Григорьев // Новые огнеупоры. ― 2017. ― № 1. ― С. 67‒70.
15. Кузин, В. В. Проектирование технологических процессов изготовления деталей из Si3N4-керамики с учетом требуемой дефектности кромок / В. В. Кузин, С. Ю. Фёдоров, С. Н. Григорьев // Новые огнеупоры. ― 2017. ― № 9. ― С. 65‒68.
16. Shukla, P. P. Examination of temperature distribution and the thermal effects on Si3N4 engineering ceramics during fibre laser surface treatment / P. P. Shukla, J. Lawrence // Optics and Lasers in Engineering. ― 2011. ― Vol. 49, № 7. ― Р. 998‒1011.
17. Xing, Youqiang. Synergistic effect of surface textures and DLC coatings for enhancing friction and wear performances of Si3N4/TiC ceramic / Youqiang Xing, Xingsheng Wang, Zhonghua Du [et al.] // Ceram. Int. ― 2020. ― Vol. 48, № 1. ― Р. 514‒524.
18. Kim, Young-Gu. Effect of the microstructure of Si3N4 on the adhesion strength of TiN film on Si3N4 / YoungGu Kim, Junichi Tatami, Katsutoshi Komeya [et al.] // Thin Solid Films. ― 2006. ― Vol. 510, № 1/2. ― Р. 222‒228.
19. Liu, Wei. PVD-CrAlN and TiAlN coated Si3N4 ceramic cutting tools - 1. Microstructure, turning performance and wear mechanism / Wei Liu, Quanquan Chu, Junjie Zeng [et al.] // Ceram. Int. ― 2017. ― Vol. 43, № 12. ― Р. 8999‒9004.
20. Pakuła, D. Structure and properties of multicomponent coatings deposited onto sialon tool ceramics / D. Pakuła // Archives of Materials Science and Engineering. ― 2011. ― Vol. 52, № 1. ― Р. 54‒60.
21. Peng, Zhijian. Hard and wear-resistant titanium nitride films for ceramic cutting tools by pulsed high energy density plasma / Zhijian Peng, Hezhuo Miao, Wei Wang [et al.] // Surface and Coatings Technology. ― 2003. ― Vol. 166, № 2/3. ― Р. 183‒188.
22. Jin, Z. H. Thermal shock residual strength of functionally graded ceramics / Z. H. Jin, W. J. Luo // Mater. Sci. Eng.: A. ― 2006. ― Vol. 435/436, № 4/5. ― Р. 71‒77.
23. Ševeček, Oldřich. Assessment of crack-related problems in layered ceramics using the finite fracture mechanics and coupled stress-energy criterion / Oldřich Ševeček, Michal Kotoul, Dominique Leguillon [et al.] // Procedia Structural Integrity. ― 2016. ― Vol. 2. ― Р. 2014‒2021.
24. Xikun, Li. Composition, characteristics and development of advanced ceramic cutting tools / Li Xikun, Liu Jing, Qiu Like [et al.] // Journal of Rare Earths. ― 2007. ― Vol. 25, supplement 2. ― Р. 287‒294.
25. Blugan, Gurdial. Si3N4-TiN-SiC three particle phase composites for wear applications / Gurdial Blugan, Mousab Hadad, Thomas Graule [et al.] // Ceram. Int. ― 2014. ― Vol. 40, № 1. Part В. ― Р. 1439‒1446.
26. Wang, Tianpeng. Numerical analysis on the residual stress distribution and its influence factor analysis for Si3N4/42CrMo brazed joint / Tianpeng Wang, Jie Zhang, Wook Jin Lee [et al.] // Simulation Modelling Practice and Theory. ― 2019. ― Vol. 95. ― Р. 49‒59.
27. Grigoriev, S. The stress-strained state of ceramic tools with coating / S. Grigoriev, V. Kuzin, D. Burton [et al.] // Proceedings of the 37th International MATADOR Conference. ― 2013. ― P. 181‒184.
28. Кузин, В. В. Основы компьютерной инженерии поверхностного слоя шлифованной керамики / В. В. Кузин, С. Н. Григорьев, М. А. Волосова // Новые огнеупоры. ― 2020. ― № 6. ― С. 64‒69.
29. Кузин, В. В. Значимость покрытий AlN и TiN для контролируемой трансформации напряженного состояния поверхностного слоя Si3N4‒TiC-керамики в условиях силового нагружения / В. В. Кузин, С. Н. Григорьев, М. А. Волосова [и др.] // Новые огнеупоры. ― 2022. ― № 3. ― С. 62‒68.
30. Кузин, В. В. Влияние покрытий AlN и TiN на тепловое и напряженное состояние поверхностного слоя Si3N4‒TiC-керамики в условиях теплового потока / В. В. Кузин, С. Н. Григорьев, М. Ю. Федоров [и др.] // Новые огнеупоры. ― 2022. ― № 4. ― С. 57‒63.
31. Kuzin, V. Method of investigation of the stress-strain state of surface layer of machine elements from a sintered nonuniform material / V. Kuzin, S. Grigoriev // Applied Mechanics and Materials. ― 2014. ― Vol. 486. ― Р. 32‒35.