Complex assessment of the residual resource of refractory materials of high-temperature aggregates


https://doi.org/10.17073/1683-4518-2022-2-61-66

Full Text:




Abstract

The article presents a comprehensive assessment of the technical condition of the heat engineering units on-line, taking into account the operational factors. The value of the residual resource of the staple-sized bucket after 30 smelters was obtained. Comparison of the calculated results with the results of the operation of the equipment. The adaptation of a comprehensive assessment of the residual resource for a lining of 25 t steel-crazy buckets allows us to talk about the possibility of its use to assess the residual resource of the refractory layer of a wide class of high-temperature installations. Ill. 2. Ref. 14. Tab. 1.


About the Authors

A. S. Nikiforov
Торайгыров университет, Некоммерческое акционерное общество
Kazakhstan


E. V. Prikhodko
Торайгыров университет, Некоммерческое акционерное общество
Kazakhstan


A. K. Kinjibekova
Торайгыров университет, Некоммерческое акционерное общество
Kazakhstan


A. E. Karmanov
Торайгыров университет, Некоммерческое акционерное общество
Kazakhstan

PhD



References

1. Aminov, R. Z. Optimization of the operating conditions of gas-turbine power stations considering the effect of equipment deterioration / R. Z. Aminov, A. I. Kozhevnikov // Therm. Eng. ― 2017. ― Vol. 64. ― P. 715‒722. https://doi.org/10.1134/S0040601517100019.

2. Смирнов, А. Н. Роторная печь для сравнительной оценки эрозионной стойкости огнеупорных изделий тепловых агрегатов / А. Н. Смирнов, Г. Г. Немсадзе, К. Н. Шарандин [и др.] // Новые огнеупоры. ― 2018. ― № 4. ― С. 145‒148. doi: 10.17073/1683-45182018-4-145-148.

3. Okrajni, J. Thermo-mechanical fatigue conditions of power plant components / J. Okrajni // Journal of Achievements in Materials and Manufacturing Engineering. ― 2009. ― Vol. 33, № 1. ― P. 53‒61.

4. Gordon, Y. Diagnostics of blast-furnace linings / Y. Gordon, A. Sadri, K. Mironov, N. Spirin // Steel in Translation. ― 2017. ― Vol. 47. ― P. 517‒522. doi: 10.3103/S0967091217080058.

5. Ge, Y. A novel approach for measuring the thickness of refractory of metallurgical vessels / Y. Ge, Y. Li, H. Wei, H. Nie, W. Ding, Y. Cao, Y. Yu // Materials. ― 2020. ― Vol. 13. ― Article № 5645. doi: 10.3390/ma13245645.

6. Jiao, K. Analysis of blast furnace hearth sidewall erosion and protective layer formation / K. Jiao, J. Zhang, Z. Liu, C. Chen, Y. Liu // ISIJ International. ― 2016. ― Vol. 56. ― P. 1956‒1963. doi: 10.2355/isijinternational. ISIJINT-2016-168.

7. Volkov, M. Existing models residual life assessment of structures and their comparative analysis / M. Volkov, A. Kibkalo, A. Vodolagina, V. Murgul // Procedia Engineering. ― 2016. ― Vol. 165. ― P. 1801‒1805. doi: 10.1016/j.proeng.2016.11.925.

8. Данюшевский, И. А. Об оценке прочности и ресурса энергооборудования с позиций современных возможностей / И. А. Данюшевский, Е. В. Георгиевская, С. Н. Гаврилов, Л. Д. Власова // Надежность и безопасность энергетики. ― 2017. ― № 10 (3). ― С. 237‒242. doi: 10.24223/1999-5555-2017-10-3-237-242.

9. Pérez, I. Post-mortem study of magnesia-chromite refractory used in a submerged arc furnace in the copper-making process / I. Pérez, I. Moreno-Ventas, R. Parra, G. Ríos // JOM. ― 2018. ― Vol. 70. ― P. 2435‒2442. doi: 10.1007/s11837-018-3090-y.

10. Никифоров, А. С. Исследование зависимости теплопроводности огнеупоров от их пропитки агрессивной средой / А. С. Никифоров, Е. В. Приходько, А. К. Кинжибекова, А. Е. Карманов // Новые огнеупоры. ― 2019. ― № 9. ― С. 50‒54. doi: 10.17073/1683-4518-20199-50-54.

11. Горюнов, О. В. Расчетно-экспериментальное обоснование вибропрочности трубопроводов АЭС на основе квазистатического подхода / О. В. Горюнов, С. В. Словцов // Надежность и безопасность энергетики. ― 2017. ― № 10 (4). ― С. 304‒309. doi: 10.24223/19995555-2017-10-4-304-309.

12. Кондрукевич, А. А. Влияние эксплуатационных факторов на стойкость рабочего слоя футеровки сталеразливочных ковшей / А. А. Кондрукевич, Д. В. Рябый // Новые огнеупоры. ― 2017. ― № 9. ― С. 3‒9. doi: 10.17073/1683-4518-2017-9-3-9.

13. Арутюнов, В. А. Математическое моделирование тепловой работы промышленных печей / В. А. Арутюнов, В. В. Бухмиров, С. А. Крупенников. ― М. : Металлургия, 1990. ― 239 с.

14. Griffith, А. А. The phenomen of rupture and floin solids / А. А. Griffith // Phil. Trans. Roy. Soc. ― 1920. ― Vol. A221, № 4. ― Р. 163‒198.


Supplementary files

For citation: Nikiforov A.S., Prikhodko E.V., Kinjibekova A.K., Karmanov A.E. Complex assessment of the residual resource of refractory materials of high-temperature aggregates. NOVYE OGNEUPORY (NEW REFRACTORIES). 2022;(2):61-66. https://doi.org/10.17073/1683-4518-2022-2-61-66

Views: 186

Refbacks

  • There are currently no refbacks.


ISSN 1683-4518 (Print)