.png)
.png)
Email this article 
Measurements of friction and wear of powder composite materials by the «pin-on-disc» mechanism
https://doi.org/10.17073/1683-4518-2020-9-60-63
Abstract
In this study, friction and wear properties of friction composite materials which is developed by powder metallurgy methods was examined.The technological sequence such as grinding, dry mixing, pressing and sintering wereused in the manufacturing of materials. The tribological properties of the obtained specimens were studied on a vertical machine MMW-1 using the «pin-on-disc» mechanism. The optical microscope Amscope was used to analyze the wear surfaces.
About the Author
F. F. YusubovRussian Federation
References
1. Hutchings, I. Tribology: friction and wear of engineering materials; 2nd ed. / I. Hutchings, P. Shipway. ― Butterworth-Heinemann Ltd, 2017. ― 412 p.
2. Barros, L. Y. Morphological analysis of pad-disc system during braking operations / L. Y. Barros, P. D. Neis, N. F. Ferreira [et al.] // Wear. ― 2016. ― Vol. 352/353. ― P. 112‒121.
3. Singh, М. K. Mechanical and tribological properties of plastically deformed copper metal matrix nano composite / M. K. Singh, R. K. Gautam // Materials Today: Proceedings. ― 2018. ― Vol. 5, № 2. ― P. 5727‒5736.
4. Straffelini, G. Wear behavior of a low metallic friction material dry sliding against a cast iron disc: Role of the heat-treatment of the disc / G. Straffelini, P. C. Verma, I. Metinoz [et al.] // Wear. ― 2016. ― Vol. 348/349. ― P.10‒16.
5. Jakob, M. Application of high performance composite polymers with steel counterparts in dry rolling/sliding contacts / M. Jakob, G. Florian, S. Florian [et al.] // Polymer Testing. ― 2018. ― Vol. 66. ― P. 371‒382.
6. Yelong, X. Mechanical and tribological behaviors of copper metal matrix composites for brake pads used in high-speed trains / X. Yelong, P. Zhongyi, K. Yaoa [et al.] // Tribology International. ― 2018. ― Vol. 119. ― P. 585‒592.
7. Nilov, A. S. Analysis of friction materials and technologies developed to make brake shoes for heavily loaded brake systems with disks made of a ceramic composite / A. S. Nilov, V. I. Kulik, A. P. Garshin // Refract. Ind. Ceram. ― 2015. ― Vol. 56, № 4. ― Р. 402‒412. Нилов, А. С. Анализ фрикционных материалов и технологий изготовления тормозных колодок для высоконагруженных тормозных систем с дисками из керамического композиционного материала / А. С. Нилов, В. И. Кулик, А. П. Гаршин // Новые огнеупоры. ― 2015. ― № 7. ― C. 57‒68.
8. Xiao, X. Review on the friction and wear of brake materials / X. Xiao, Y. Yin, J. Bao [et al.] // Advances in Mechanical Engineering. ― 2016. ― Vol. 8, № 5. ― P. 1‒14.
9. Jiusheng, B. Wear modalities and mechanisms of the mining non-asbestos composite brake material / B. Jiusheng, Y. Yin, Z. Zhu [et al.] // Appl. Compos. Mater. ― 2012. ―Vol. 20, № 4. ‒ P. 331‒339.
Supplementary files
For citation: Yusubov F.F. Measurements of friction and wear of powder composite materials by the «pin-on-disc» mechanism. NOVYE OGNEUPORY (NEW REFRACTORIES). 2020;(9):60-63. https://doi.org/10.17073/1683-4518-2020-9-60-63
Refbacks
- There are currently no refbacks.