Refractory material moisture metering when heating high-temperature units

A. S. Nikiforov; E. V. Prihod'ko; A. K. Kinzhibekova; A. E. Karmanov

doi:10.17073/1683-4518-2020-4-56-59

Refractory material moisture metering when heating high-temperature units

A. S. Nikiforov, E. V. Prihod'ko, A. K. Kinzhibekova, A. E. Karmanov

https://doi.org/10.17073/1683-4518-2020-4-56-59

Full Text:

Abstract

The specifics of the drying process of the lining of hightemperature units are described, in particular, the average drying rate is analyzed. The adequacy of the proposed mathematical dependencies is confirmed by comparing the results obtained by calculation, and experimental data obtained at the laboratory bench. The research results can be used to develop a schedule for heating high-temperature units after major repairs to remove moisture.

Keywords

refractory materials, drying, high-temperature units (HTU), lining, moisture limit coefficient,

About the Authors

A. S. Nikiforov

Павлодарский государственный университет имени С. Торайгырова
Russian Federation

E. V. Prihod'ko

Павлодарский государственный университет имени С. Торайгырова
Russian Federation

A. K. Kinzhibekova

Павлодарский государственный университет имени С. Торайгырова
Russian Federation

A. E. Karmanov

Павлодарский государственный университет имени С. Торайгырова
Russian Federation

References

1. Innocentini, M. D. M. Vaporization process and pressure build-up during dewatering of dense refractory castables / M. D. M. Innocentini, M. F. S. Miranda, F. A. Cardoso, V. C. Pandolfelli // J. Am. Ceram. Soc. ― 2003. ― Vol. 86, № 9. ― Р. 1500‒1503.

2. Ramal, F. T. Water content and its effect on the drying behavior of refractory castables, refractories / F. T. Ramal, Jr. R. Salomao, V. S. Pandolfelli // Applications and News. ― 2005. ― Vol. 10, № 3. ― Р. 10‒13.

3. Salomao, R. The particle size distribution effect on the drying efficiency of polymeric fibers containing castables / R. Salomao // Ceram. Int. ― 2008. ― № 34. ― Р. 173‒180.

4. Zabolotskii, A. V. Mathmatical modeling of the movement of moisture in refractory concrete and gunni bodies during drying / A. V. Zabolotskii, L. M. Aksel’rod, R. A. Donich [et al.] // Refract. Ind. Ceram. ― 2017. ― Vol. 57, № 6. ―P. 578‒584. https://doi.org/10.1007/s11148-017-0026-y.

5. Заболотский, А. В. Математическое моделирование движения влаги в огнеупорных бетонах и торкрет-массах во время сушки / А. В. Заболотский, Л. М. Аксельрод, Р. А. Донич [и др.] // Новые огнеупоры. ― 2016. ― № 12. ― С. 6‒12.

6. Baboo, Prem. Secondary reformer refractory dry out operation / Prem Baboo // Int. J. Eng. Res. Technol. (IJERT). ― 2019. ― Vol. 8, № 5. ― P. 536‒545.

7. Проект сушки огнеупорной антикоррозионной защиты оборудования серного потока «Соликамскбумпром». http://wellons.pro/en/articles/drying-project-refractorysulfur-flow-plant-jsc-solikamskbumprom.

8. Jenkins, Jim. Important considerations for refractory dryouts, startups & shutdowns 2011 sulfur recovery symposium in vail, CO / Jim Jenkins, Andy Piper, Jeff Proctor. ― Brimstone STS Limited ― September 13‒16, 2011. ― P. 3‒15.

9. Luz, A. P. Drying behavior optimization of dense refractory castables by adding apermeability enhancing active compound / A. P. Luz, M. H. Moreira, C. Wöhrmeyer [et al.] // Ceram. Int. ― 2019. ― Vol. 45, № 7. ― Р. 9048‒9060.

10. Лыков, А. В. Теория сушки / А. В. Лыков. ― М. : Энергия, 1968. ― 600 с.

11. Тимошенко, Д. А. Сушка футеровки тепловых агрегатов / Д. А. Тимошенко, Е. Е. Коломыцев // Новые огнеупоры. ― 2013. ― № 12. ― С. 12‒14.

Supplementary files

For citation: Nikiforov A.S., Prihod'ko E.V., Kinzhibekova A.K., Karmanov A.E. Refractory material moisture metering when heating high-temperature units. NOVYE OGNEUPORY (NEW REFRACTORIES). 2020;(4):56-59. https://doi.org/10.17073/1683-4518-2020-4-56-59

Refbacks

There are currently no refbacks.

ISSN 1683-4518 (Print)

Username
Password