Open Access Open Access  Restricted Access Subscription Access

Dry friction behavior of barite-containing composites with pair steel


https://doi.org/10.17073/1683-4518-2019-11-64-67

Full Text:




Abstract

This article is devoted to the preparation of environmentally friendly composites by powder metallurgy and the study of tribological properties. Tribological tests were carried out in MMW-1 friction machine with vertical block using the «pinon-disk» mechanism in dry conditions. As a counterbody, steel disc was used. To determine changes in the tribological characteristics in the studied samples at different loads, sliding distance and velocity were left unchanged. Ill. 4. Ref. 5. Tab. 3.

About the Author

F. F. Yusubov
Азербайджанский государственный университет нефти и промышленности
Azerbaijan


References

1. Denkena, B. Microstructuring of thermo-mechanically highly stressed surfaces / B. Denkena, A. Rienäcker, G. Knoll [et al.]. ― Springer, 2015. ― 175 p.

2. Bhushan, B. Principles and applications of tribology ; 2nd ed. / B. Bhushan. ― John Wiley & Sons, 2013. ― 1006 p.

3. Крагельский, И. В. Трение и износ ; 2-е изд. / И. В. Крагельский. ― М. : Машиностроение, 1968. ― 430 с.

4. Filip, P. On friction layer formation in polymer matrix composite materials for brake applications / P. Filip, Z. Weiss, D. Rafaja // Wear. ― 2002. ― Vol. 252, № 3/4. ― P. 189‒198.

5. Shin, M. W. Effect of the abrasive size on the friction effectiveness and instability of brake friction materials: a case study with zircon / M. W. Shin, Y. H. Kim, H. Jang // Tribology Letters. ― 2014. ― Vol. 55. ― P. 371‒379.


Supplementary files

For citation: Yusubov F.F. Dry friction behavior of barite-containing composites with pair steel. NOVYE OGNEUPORY (NEW REFRACTORIES). 2019;(11):64-67. https://doi.org/10.17073/1683-4518-2019-11-64-67

Views: 231

Refbacks

  • There are currently no refbacks.


ISSN 1683-4518 (Print)