The investigation of the converter slag's phase and mineralogical properties in splashing to improve the lining resistance

V. O. Sinel'nikov; D. Kalish; R. D. Kuzemko

doi:10.17073/1683-4518-2018-8-36-42

The investigation of the converter slag's phase and mineralogical properties in splashing to improve the lining resistance

V. O. Sinel'nikov, D. Kalish, R. D. Kuzemko

https://doi.org/10.17073/1683-4518-2018-8-36-42

Full Text:

Abstract

The methods to improve the slag splashing operation were regarded in the article. The phase and mineralogical properties were studied for the converter slag's of one of the Europe Iron and Steel Works. The modeling results for the slags with diﬀerent compositions are given on base of the earlier studies of the physical and chemical properties.Ill.8. Ref. 28. Tab.1.

Keywords

slag spraying, «slag splashing» technology, converter slag,

About the Authors

V. O. Sinel'nikov

«AGH» Научно-технический университет
Poland

D. Kalish

«AGH» Научно-технический университет
Poland

R. D. Kuzemko

ГВУЗ «Приазовский государственный технический университет»
Ukraine

References

1. Калиш, Д. Исследования физико-химических свойств шлака при его разбрызгивании на футеровку кислородного конвертера / Д. Калиш, В. О. Синельников, К. Куглин // Новые огнеупоры. ― 2017. ― № 3. ― С. 78‒83. [Kalisz, D. Investigation of the physicochemical properties of slag splashed on the lining of an oxygen converter / D. Kalisz, V. O. Sinelnikov, K. Kuglin // Refract. Ind. Ceram. ― 2018. ― Vol. 55, № 5. ― P. 463‒468. DOI: 10.1007/s11148-018-0128-1.]

2. Sinelnikov, V. O. Inﬂuence the FeO content on slag viscosity at his spraying. Increase the life of the refractory lining / V. O. Sinelnikov, D. Kalisz // Glass Ceram. ― 2016. ― Vol. 73, № 3/4. ― P. 144‒148. DOI: 10.1007/s10717-016-9844-5.

3. Mills, K. C. A Review of slag splashing / K. C. Mills, Y. Su, A. B. Fox [et al.] // ISIJ International. ― 2005. ― Vol. 45, № 5.― P. 619‒633. DOI: 10.2355/isijinternational.45.619.

4. Sinelnikov, V. O. Inﬂuence of hydrodynamic and temperature conditions on the efciency of the slag splashing method / V. O. Sinelnikov, D. Kalisz, R. D. Kuzemko // Journal of Machine Construction and Maintenace. Problemy Eksploatacji. ― 2017. ― Vol. 105, № 2. ― P. 93‒98.

5. Kalisz, D. Viscosity calculation of mold slag in continuous casting / D. Kalisz // Archives of Materials Science and Engineering. ― 2012. ― Vol. 58, № 2. ― P. 164‒170.

6. Barron, M. A. Slag splashing in a basic oxygen furnace under diﬀerent blowing conditions / M. A Barron, H. Isaias, D. Y. Medina // Open Journal of Applied Sciences. ― 2015. ― № 5. ― P. 819‒825. DOI: 10.4236/ojapps.2015.512078.

7. Kharlashin, P. S. Inﬂuence of diﬀerent factors and physical impacts on the power of ﬂowing supersonic jet during slag spraying in the converter / P. S. Kharlashin, R. D. Kuzemko, V. O. Sinelnikov // New developments in mining engineering. ― 2015. ― P. 597‒602.

8. Kuzemko, R. D. Analysis of the ﬂow of gas/powder mixture in the oxygen converter lance nozzles / R. D. Kuzemko, V. O. Sinelnikov, V. V. Mastykash, D. Kalisz // Journal of Machine Constuction and Maintenance. ― 2018. ― Vol. 108, № 1. ― P. 111‒117.

9. Sinelnikov, V. O. Modeling viscosity of converter slag / V. O. Sinelnikov, D. Kalisz // Archives of foundry engineering. ― 2015. ― Vol. 15, № 4 (Special Issue). ― P. 119‒124.

10. Kharlashin, P. S. Inﬂuence of preliminary heating of nitrogen on gas ejection into the converter / P. S. Kharlashin, A. B. Kovura, R. D. Kuzemko // Steel in Translation. ― 2011. ― Vol. 41, № 9. ― P. 745‒748. DOI: 10.3103/S0967091211090087.

11. Messina, C. J. The worldwide status of BOF slag splashing practices and performance / C. J. Messina, J. R. Paules // In Proceedings of the 79th Steelmaking Conference. ― 1996. ― P. 153‒155.

12. Ciechanowska, M. Model research of the maintenance of the refractory lining of the BOF with «slag splashing» method / M. Ciechanowska, J. Pieprzyca // Hutnik Wiadomości Hutnicze. ― 2014. ― Vol. 81, № 3/4. ― P. 136‒141.

13. Bodsworth, C. The extraction and refning of metals / C. Bodsworth. ― Middlesex : CRC Press Taylor & Francis Group, 1994. ― 386 p.

14. Yildirim, I. Z. Chemical, mineralogical, and morphological properties of steel slag / I. Z. Yildirim, M. Prezzi // Advances in Civil Engineering. ― 2011. ― Vol. 2011. ― P. 1‒13. DOI: 10.1155/2011/463638.

15. Zhao, J. Comparasion of grinding characteristics of converter steel slag with and without pretreatment and grinding aids / J. Zhao, D. Wang, P. Yan, W. Lei // Applied Sciences. ― 2016. ― Vol. 236, № 6. ― P. 1‒15. DOI: 10.3390/app6110237.

16. Vilciu, I. Difractometric analyse of steel slags viewing their use for road construction / I. Vilciu, M. Nicolae, M. D. Stoica // Annals of Faculty Engineering Hunedoara, International Journal of Engineering. ― 2011. ― № 9. ― P. 145‒148.

17. Chen, M. Viscosity measurments of SiO2‒FeO‒CaO system with equilibrium with metallic Fe / M. Chen, B. Zhao // Metall. Mater. Trans. B. ― 2015. ― Vol. 46, № 2. ― P. 577‒584. DOI: 10.1007/s11663-014-0241-6.

18. Zhao, J.-C. Methods for phase diagram determination / J. -C. Zhao. ― Oxford : Elsevier, 2007. ― 520 p. DOI: 10.1016/B978-0-08-044629-5.X5000-9.

19. Tayeb, M. A. MgO solubility in steelmaking slag / M. A. Tayeb, A. N. Assis, S. Sridhar, R. J. Fruchan // Metall. Mater. Trans. B. ― 2015. ― Vol. 46, № 3. ― P. 1112‒1114. DOI: 10.1007/s11663-015-0352-8.

20. Montecinos, R. A. MgO saturation analisys of CaO‒SiO2‒FeO‒MgO‒Al2O3 slag system / R. A. Montecinos de Almeida, D. Vieira, W. V. Bielefeldt, A. C. Faria Viela // Materials Research. ― 2018. ― Vol. 21, № 1. DOI: 10.1590/1980-5373-MR-2017-0041.

21. Borecki, M. New slag-forming material for MgO content control in steelmaking slag / M. Borecki // Prace Instytutu Metalurgii Żelaza. ― 2010. ― Vol. 62, № 1. ― P. 180‒184.

22. Kalisz, D. Modelowanie procesu rafnacji i wprowadzania azotu w stalach elektrotechnicznych / D. Kalisz. ― Kraków : Wydawnictwo Naukowe Akapit, 2012. ― 88 p.

23. Francik, P. Wybrane aspekty stosowania materiałów odpadowych w procesie spiekania rud żelaza / P. Francik, D. Burchart-Korol // Hutnik-Wiadomości Hutnicze. ― 2016. ― Vol. 73, № 8/9. ― P. 388‒394.

24. Jończy, I. Składniki fazowe wybranych mineralnych surowców odpadowych w obrazach mikroskopowych / I. Jończy, J. Nowak, A. Porszke, E. Strzałkowska. ― Gliwice : Wydawnictwo Politechniki Śląskiej, 2012. ― 200 p.

25. http://ispatguru.com/89/ (2018.04.29).

26. Mazanek, T. Podstawy teoretyczne metalurgii żelaza / T. Mazanek, K. Mamro. ― Katowice : Wydawnictwo Śląsk, 1969. ― 351 p.

27. Kawecka-Cebula, E. Filtration of non-metallic inclusion in steel / E. Kawecka-Cebula, Z. Kalicka, J. Wypartowicz // Archives of Metallurgy and Materials Science. ― 2006. ― Vol. 51, № 2. ― P. 261‒268.

28. Kalisz, D. Modeling physicochemical properties of mold slag / D. Kalisz // Archives of Metallurgy and Materials Science. ― 2014. ― Vol. 59, № 1. ― P. 149‒155.

Supplementary files

For citation: Sinel'nikov V.O., Kalish D., Kuzemko R.D. The investigation of the converter slag's phase and mineralogical properties in splashing to improve the lining resistance. NOVYE OGNEUPORY (NEW REFRACTORIES). 2018;(8):36-42. https://doi.org/10.17073/1683-4518-2018-8-36-42

Refbacks

There are currently no refbacks.

ISSN 1683-4518 (Print)

Username
Password